Inj YK 11 log/ Ralox Protocol

manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I just looked at my bottle of Raloxifene, and noticed a white substance at the bottom of the bottle. I shook it, and it's still partially there. And, there is some white floating stuff in the bottle?

Does this mean the bottle has "crashed?" What should I do to fix this? I was gonna deploy a gyno reversal protocal.
 

CTB4444

New member
Awards
1
  • First Up Vote
I've been using their Ralox for years this is what I do. I fill a coffee cup with water half way and microwave it. Then I submerge the ralox bottle in the hot water until it heats up and shake it real good every couple of minutes until its mixed together. You'll have to do this every couple of days.
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I've been using their Ralox for years this is what I do. I fill a coffee cup with water half way and microwave it. Then I submerge the ralox bottle in the hot water until it heats up and shake it real good every couple of minutes until its mixed together. You'll have to do this every couple of days.
Right on. Thank you.
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I've been using their Ralox for years this is what I do. I fill a coffee cup with water half way and microwave it. Then I submerge the ralox bottle in the hot water until it heats up and shake it real good every couple of minutes until its mixed together. You'll have to do this every couple of days.
I'm assuming you're talking about the AA brand?
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I'm I'm a little dilemma here...I started an injectable yk 11 cycle a few days back with my TRT...

And then I found out the family and I got invited to the beach for a few days.

So, I want to try to knock this gyno out some before we go.

Is there any reason I should stop the yk 11 to proceed with this Ralox protocol? Or can I just continue on with both?

@Smont
@Hyde
@DR.D
@Renew1
@khall1974
@Jstrong20
@Richie Rich
 
Smont

Smont

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
I wouldn't think that yk11 would have any negative impacts on it, I would just stick with what you're doing and add the ralox, if I was going to lower anything it would be my testosterone dosage as that converts to estrogen but the YK should not. I'm getting ready to do something similar and I'm taking my testosterone all the way down to 75 mg a week. I've always had good luck with the raloxefine and I'm hoping lower estrogen from a lower testosterone dose will make it work even better. Usually within about a month I can get it to shrink up completely unnoticeable to wear even I have to fish around to feel for it lol.

If all else fails you can get a sexy two-piece bathing suit, 😙😙😙
 
Renew1

Renew1

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
I'm I'm a little dilemma here...I started an injectable yk 11 cycle a few days back with my TRT...

And then I found out the family and I got invited to the beach for a few days.

So, I want to try to knock this gyno out some before we go.

Is there any reason I should stop the yk 11 to proceed with this Ralox protocol? Or can I just continue on with both?

@Smont
@Hyde
@DR.D
@Renew1
@khall1974
@Jstrong20
@Richie Rich

I think you'd be fine to continue...
Let us know what you decide, and how it goes ....
(y)
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
Thanks guys...yeah I just wanted to add some size quickly before I head to the beach....and I'm hearing excellent things about the injectable Yk...

I have my trt dose down to 180/wk, 60mg 3 times per week.

So I'm gonna go ahead with the Ralox protocol and continue the YK. Im not running an AI, since my test ranges are not in supraphysiological levels.
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
So...im doing

Test cypionate , 180 mg
Injectable YK 11 - 20mg
Ralox - 120mg until lumps subside, then down to 30 for a few weeks
 
Renew1

Renew1

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
So...im doing

Test cypionate , 180 mg
Injectable YK 11 - 20mg
Ralox - 120mg until lumps subside, then down to 30 for a few weeks
Are these lumps a recent development?
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
Are these lumps a recent development?
Nah, I have had them for a few years. They are only noticeable sometimes, but I can feel the tissue in there, and they look really puffy at times.

I recently heard about the Ralox protocol. Before this, I was just going to get surgery someday. But, I figure I'd give it a try. I'm trying to look really good at the beach, and avoid being self conscious.

I have visible abs right now, and probably look the best I ever have. I'm just hoping for some quick extra size from the YK and to get rid of some of the lumps, if not all of them.
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
Again, I'm not going to run an AI at all, since I don't have issues with test at this dose....and I don't want to deal with E2 rebound at the end of the Ralox
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I do have some Exemestane on hand if you guys think I should incorporate that into the Ralox protocol?
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I just really hate crashing my E2 and missing out on all of its benefits..
 
Smont

Smont

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
I do have some Exemestane on hand if you guys think I should incorporate that into the Ralox protocol?
I can't tell you how much exemestane will crash you but the first 2 times I did the ralox I spent a little bit of time on 12.5mg exem daily in the beginning of the ralox. This time around I'm not going to do that I'm going to lower my testosterone and up my dose of ralox.

My gyno is a few years old, it comes on every year, I zap it with ralox, it dissapear a d comes back in 6-8 months regardless of what I do.

Eventually I need surgery and I've got the bank for it, but what I don't have is the ability to take time off of work for any extended period of time. My jobs are all intense manual labor for the most part, I wouldn't be able to work and if I tried to work I would probably get some kind of an infection from all the sweat and dirt. For me it's a no-go on the surgery until it becomes an absolute necessity and I don't see it as a necessity yet I can deal with having puffy nips that come and go and a small lump for a few months out of the year lol. Honestly it's only noticeable when my body fats low and I'm flexing my chest muscles which is not a common thing that I'll be walking around shirtless flexing my chest if I'm at the beach or even at the gym no one ever notices it. Heck the worst it's ever looked is in the pictures I posted here on the forum LOL
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I can't tell you how much exemestane will crash you but the first 2 times I did the ralox I spent a little bit of time on 12.5mg exem daily in the beginning of the ralox. This time around I'm not going to do that I'm going to lower my testosterone and up my dose of ralox.

My gyno is a few years old, it comes on every year, I zap it with ralox, it dissapear a d comes back in 6-8 months regardless of what I do.

Eventually I need surgery and I've got the bank for it, but what I don't have is the ability to take time off of work for any extended period of time. My jobs are all intense manual labor for the most part, I wouldn't be able to work and if I tried to work I would probably get some kind of an infection from all the sweat and dirt. For me it's a no-go on the surgery until it becomes an absolute necessity and I don't see it as a necessity yet I can deal with having puffy nips that come and go and a small lump for a few months out of the year lol. Honestly it's only noticeable when my body fats low and I'm flexing my chest muscles which is not a common thing that I'll be walking around shirtless flexing my chest if I'm at the beach or even at the gym no one ever notices it. Heck the worst it's ever looked is in the pictures I posted here on the forum LOL
Yeah, I'm in the same boat...I cant afford to take any time off work for surgery right now, and I don't want to have to miss training to deal with the recovery...

This is my first try with the Ralox...so hoping for the best. I'll post some pics in here when I get a chance
 
DR.D

DR.D

Well-known member
Awards
1
  • Established
Nah, I have had them for a few years. They are only noticeable sometimes, but I can feel the tissue in there, and they look really puffy at times.

I recently heard about the Ralox protocol. Before this, I was just going to get surgery someday. But, I figure I'd give it a try. I'm trying to look really good at the beach, and avoid being self conscious.

I have visible abs right now, and probably look the best I ever have. I'm just hoping for some quick extra size from the YK and to get rid of some of the lumps, if not all of them.
If you just need a quick fix, you might also try replacing your bench routine with inclines. My lumps are less noticeable when I focus training on my upper chest.
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
On a side note, this injectable YK has some serious PIP....I know warming the oil helps with traditional AAS....would warming up the sarm oil help?
 
Smont

Smont

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
On a side note, this injectable YK has some serious PIP....I know warming the oil helps with traditional AAS....would warming up the sarm oil help?
Shouldn't have any pip, warming the oil shouldn't reduce pip either, not in sarms or traditional injectable steroids in my opinion. Pip comes from solvent and Carrier oils, and if the solution has crashed that's a different story, heating it would put it back in solution. Is it from MA? I haven't had pip from any of Mike's Injectables, haven't heard about anyone else getting it either
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
Shouldn't have any pip, warming the oil shouldn't reduce pip either, not in sarms or traditional injectable steroids in my opinion. Pip comes from solvent and Carrier oils, and if the solution has crashed that's a different story, heating it would put it back in solution. Is it from MA? I haven't had pip from any of Mike's Injectables, haven't heard about anyone else getting it either
It's from Supreme labs...a couple peeps have ran it on here...
I'm working on figuring put what the carrier oil is
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
Shouldn't have any pip, warming the oil shouldn't reduce pip either, not in sarms or traditional injectable steroids in my opinion. Pip comes from solvent and Carrier oils, and if the solution has crashed that's a different story, heating it would put it back in solution. Is it from MA? I haven't had pip from any of Mike's Injectables, haven't heard about anyone else getting it either
I warmed primo before...and it definitely helped....like noticeably
 
Smont

Smont

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
It's from Supreme labs...a couple peeps have ran it on here...
I'm working on figuring put what the carrier oil is
Interested to know too, I know our yk is just MCT, BA, BB

Is there any crystals or anything, new injection site maybe?
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
Interested to know too, I know our yk is just MCT, BA, BB

Is there any crystals or anything, new injection site maybe?
No crystals, and it's my typical gluten and delts..debts...

I've never injected sarms before...so it is new for the muscles
 
Smont

Smont

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
No crystals, and it's my typical gluten and delts..debts...

I've never injected sarms before...so it is new for the muscles
Ya the sarms being new to the muscle is not a thing. It would only make a difference if it was a new site or new oil or solvent ect
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
Smont

Smont

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
I bet you could contact customer service or something and ask what the product is made with.
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I bet you could contact customer service or something and ask what the product is made with.
Yeah, I'm working on it now. I'm hoping it will just pass when the muscle gets use to it
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I use to put 2ml of primo and cyp into a syringe, and then into a heating pad until warm. It helped alot, but both were ugl
 
Smont

Smont

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
I use to put 2ml of primo and cyp into a syringe, and then into a heating pad until warm. It helped alot, but both were ugl
The thing I'm getting at is it's not so much the sarm or the steroid that makes the difference it's how it's made. So heating up something that might not be fully in solution would make it better or heating up a very thick oil would make it better because if it's warm it's going to be thinner but if the product itself is causing pain I don't think warming it would stop the pain, does that make sense.

I'm bad at explaining things sometimes I know what I'm trying to say but I'm having a hard time putting it into words lol
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
The thing I'm getting at is it's not so much the sarm or the steroid that makes the difference it's how it's made. So heating up something that might not be fully in solution would make it better or heating up a very thick oil would make it better because if it's warm it's going to be thinner but if the product itself is causing pain I don't think warming it would stop the pain, does that make sense.

I'm bad at explaining things sometimes I know what I'm trying to say but I'm having a hard time putting it into words lol
Yeah, I get what your saying. I'll let you know when I find out what Supremes carrier oil is...
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
Also, I've been doing 2 injections a day of the YK for stable blood levels. I don't think that's sustainable. I'll probably switch to just pre workout
 
Smont

Smont

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
Also, I've been doing 2 injections a day of the YK for stable blood levels. I don't think that's sustainable. I'll probably switch to just pre workout
I'm starting my raloxefine today @90-100mg for the first week. Sometimes there's a little bit that gets stuck in my dropper that's why I'm saying 90-100. After a week or 2 if it's shrinking il drop to 40-50 for the remainder of about 6 weeks
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I'm at day 6 right now...... i started at 120 for the first couple days, but im at 90 now.

I think the lumps may be getting a little smaller, but they seem to hurt more.

This could be because I'm messing with them more, and creating the pain myself.
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
This thread will be to document my Ralpx results, and YK 11...should be a fun one. I'll post some pics this time for sure.
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
20220615_114549.jpg
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
Not a great pic.

This is after breakfast with a full stomach. Just so u can see where my BF is at
 
DR.D

DR.D

Well-known member
Awards
1
  • Established
Lookin' pretty ripped bro! That's a lot of roman chairs I'd guess.
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
Lookin' pretty ripped bro! That's a lot of roman chairs I'd guess.
Haha I do alot of planks...thats pretty much the extent of my core/ab work. I've just been real consent with my calories and workout routine.

And cut out all alcohol.
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
So, I just looked closer at my vial of yk-11 and there is definitely some crystals in there....

Not sure what I should do? Warm up the vial and shake it?

Feel up the syringe and warm the oil in there?

Is the product ruined?
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
Interested to know too, I know our yk is just MCT, BA, BB

Is there any crystals or anything, new injection site maybe?
I guess i should've looked closer when you asked me about the crystals...
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I put the vial in some hot water, and put a pin in the tip to relieve pressure. I sat the vial in there for a few minutes, and it appears all the crystals are gone.

What causes the crystallization? And, is it preventable?
 
Smont

Smont

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
I put the vial in some hot water, and put a pin in the tip to relieve pressure. I sat the vial in there for a few minutes, and it appears all the crystals are gone.

What causes the crystallization? And, is it preventable?
It happens in the brewing process, something got screwed up.

When I e had this happen I vent the bottle with a pin and put it in a frying pan with a little water and heat it, keep the temp just shy of boiling. Shake every 2-3min and after 10-12 min it should be disolved. You may have to repeat that process every few days depending on how badly the product crashed. Another solution is use slin pins, the needle is too small to draw up the crystals usually
 
Smont

Smont

Legend
Awards
4
  • Established
  • First Up Vote
  • Best Answer
  • RockStar
Side note, if it gets too hot or you have to do it too many times the rubber stopper may melt and product is no longer good obviously. You could also get a needle with a filter and filter it into a new bottle, concentration might be a hair lower after doing that (to filter out the crystals, not the rubber, if the stopper melts it's trash)
 
Last edited:
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
It happens in the brewing process, something got screwed up.

When I e had this happen I vent the bottle with a pin and put it in a frying pan with a little water and heat it, keep the temp just shy of boiling. Shake every 2-3min and after 10-12 min it should be disolved. You may have to repeat that process every few days depending on how badly the product crashed. Another solution is use slin pins, the needle is too small to draw up the crystals usually
The weird thing is, I've been using a skin pin the entire time. The crystals mustve been small enough to sneak their way in...
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
@Richie Rich did you get PIP from Supremes Yk? Did yours have any crystals
 
manifesto

manifesto

Well-known member
Awards
6
  • Established
  • First Up Vote
  • RockStar
  • RockStar
  • RockStar
  • RockStar
I just realized Richie Rich ain't been on since April...

@Leakydelts do you get any PIP from the injectable sarms? I know yluse a different brand than I have, but just curious.
 

Similar threads


Top