What pins to get?

[jamez45]

I am about to start my first injectable cycle(test c), a freind of mine who is kind of guiding me with the injections say he uses 33ga insl. needles in his shoulders and ass, is this common size for that? I want to order some pins for butt, shoulder and maybe trap injections...anybody have any sugestions on what to get? (gauge/length?)

 

[bigpapa]

I am about to start my first injectable cycle(test c), a freind of mine who is kind of guiding me with the injections say he uses 33ga insl. needles in his shoulders and ass, is this common size for that? I want to order some pins for butt, shoulder and maybe trap injections...anybody have any sugestions on what to get? (gauge/length?)

23g X1 inch is fine. 33 IMO is waaayyy to small for test and also depending how thick the oil might be.

 

[gamer2be08]

20g to draw. I use 22g to pin in glutes and thigh. But I recommend 23g. 1in pins to inject. 33g is too thin for test cyp.. IMO

 

[Steveoph]

23 or 25g tend to be the standard. Both are fine. Draw with something like a 20 or 21

 

[bigpapa]

i also draw with 18...if that helps

 

[gamer2be08]

i also draw with 18...if that helps

I bet your rubber stopper hates that. Imagine getting a small chunk of rubber in your syringe and injecting that IM.. Ouch..

 

[bigpapa]

I bet your rubber stopper hates that. Imagine getting a small chunk of rubber in your syringe and injecting that IM.. Ouch..

hahah, well i havent had a problem yet. im very good with insertions lol

 

[gamer2be08]

hahah, well i havent had a problem yet. im very good with insertions lol

LMAO, you lube up first? Im just warning you, I have heard of a couple incidents with 18g drawings..

 

[bigpapa]

LMAO, you lube up first? Im just warning you, I have heard of a couple incidents with 18g drawings..

no i know dude. i always make sure to check for debris. trick is to ease it in gently...nice and slow...

 

[tim1985]

no i know dude. i always make sure to check for debris. trick is to ease it in gently...nice and slow...

Sounds like your describing anal, I always check for debris afterwards also :damnit1:

But in a seriousness, I have 30ml of Test that has black shit floating in it from using an 18g

 

[bigpapa]

Sounds like your describing anal, I always check for debris afterwards also :damnit1:

of course check for debris after also. no no for anal u gotta loosen it up a bit first ya no..just so its not too much of a shock for her lol

 

[gamer2be08]

of course check for debris after also. no no for anal u gotta loosen it up a bit first ya no..just so its not too much of a shock for her lol

Who said anything about a her?

 

[n8te]

Trap injections. Ouch u might regret that. And yea as said before 23 for ink. Is the way to go

 

[icon0561]

23-25g is going to work well especially if you are going to pin glutes as you'll need something longer than an insulin needle. Also most slin syringes don't go over 1cc so unless your running a really high concentration Test C or plan on pinning every day I would stick with the 20g-22g to draw and 23-25g 1.5" paired with a 3cc syringe for injects.

 

[DAdams91982]

If you are pretty steady, go with the 25 gauge. I have always used a 25G without issues. Warm the oil and inject slowly. Works like a charm for every oil.

 

[jamez45]

If you are pretty steady, go with the 25 gauge. I have always used a 25G without issues. Warm the oil and inject slowly. Works like a charm for every oil.

whats ur method of warming the oil?

 

[icon0561]

whats ur method of warming the oil?

Most people I know just run the vial under hot tap water. It helps to reduce the viscosity of the oil so it flows better through a smaller pin.