Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Bad Signs from testosterone injections CYP

Husker89

Banned
I want to hear from all of the bright people on here who have this valuable knowledge. I want to know is soreness bad redness, irritation, fever, etc. Please add your opinion, i just started 600 cyp a week and did first shot ever last night. Today it is not swolen or red and no fever but is a little sore. Please comment thank you.
 
Signs of infection are standard; redness, warmth and tenderness. If there's neither of these but you have persistent, intense pain for several days there's the small chance you developed a sterile abscess. Pain is natural, has to do with the properties of the oil
 
Steveoph said:
Signs of infection are standard; redness, warmth and tenderness. If there's neither of these but you have persistent, intense pain for several days there's the small chance you developed a sterile abscess. Pain is natural, has to do with the properties of the oil
Click to expand...


what about pain just for like the rest of the day after you pin but is gone the next day?

Funny thing about my left arm, even when all I do is have my blood drawn, something about that specific arm, there is a little bit of pain that stays with me all day long, but is gone the next morning when I wake up. Maybe an irritated nerve in that arm or something.
 
I pinned in my right outer quad no swelling or redness or fever or anything but it is kinda sore, i think that is natural for my 1st ever injection. Feedback please.
 
pain- normal, stiffness- normal, redness-normal, warmth around inj. site- normal

fever- BAD BAD SIGN

if you get a fever, chances are you have used
either
a. Contaminated oil
or
b. dirty injection procedures


either way fever is not normal

if you get an infection- its an abcess- if you want to have about ehh i dunno 2-4 inches of skin/meat/fat/tissue carved out of you dont go see a doctor

some people are stupid, if you get a fever after pinning- go to the doctor RIGHT AWAY
 
schwellington said:
pain- normal, stiffness- normal, redness-normal, warmth around inj. site- normal

fever- BAD BAD SIGN

if you get a fever, chances are you have used
either
a. Contaminated oil
or
b. dirty injection procedures


either way fever is not normal

if you get an infection- its an abcess- if you want to have about ehh i dunno 2-4 inches of skin/meat/fat/tissue carved out of you dont go see a doctor

some people are stupid, if you get a fever after pinning- go to the doctor RIGHT AWAY
Click to expand...

yah that SOO doesn't ease the mind about pinning, lol. Just how common is this? I mean is it like one of those things where it happens, it's because the dude was just really being an idiot about how he was injecting? Or can it happen even when you are 100 percent careful and know what you are doing?
 
MakaveliThaDon said:
yah that SOO doesn't ease the mind about pinning, lol. Just how common is this? I mean is it like one of those things where it happens, it's because the dude was just really being an idiot about how he was injecting? Or can it happen even when you are 100 percent careful and know what you are doing?
Click to expand...

if you are sterile with injection procedures( use an alcohol wipe to swab your vial, then use the wipe to swab injection site, and use a sterile needle) then thats the easy part to avoid. If you do this procedure there is ONE and ONLY one way to get an infected abscess- the gear your injecting is dirty(contaminated with bacteria) This is where you have to KNOW YOUR SOURCE IS LEGIT. if they know what they are doing your fine, if they made it in their kitchen- probably a bad idea to use the gear.


its not to common i know guys who pin alot, hell i pin alot, never had it happen or know of people personally having it happen
 
ya thanks for the info swellington you seem to be very knowledgable, last question. Are there things i can do to reduce the stiffness in my leg so i can lift legs like ice or heat pad, also how often should i use the same muscle for injection, i was thinking right quad monday, left quad thursday, right shoulder monday, left shoulder thursday and repeat cycle thats good right?
 
you SHOULD rotate muscles absolutely. THe outline you used above would work just fine. Nothing you can do for the stiffness- this in time will not happen anymore. My first couple of pins the muscle would stiffen up a bit and be hard as hell to extend. But after a while it stopped- this is just your body's reaction to the oil, but once it becomes accustomed to it it wont knot up(or it shouldn't if it does your source uses to much BA(benzyl alcohol) which isn't BAD but makes injecting painful is all reallY)

as for 25 guage- good size, 5/8???? I dunno i personally use a 1' needle BUT 5/8 is fine for shoulders, for quads- if you dont have alot of fat around your quads it should work fine
 
schwellington said:
you SHOULD rotate muscles absolutely. THe outline you used above would work just fine. Nothing you can do for the stiffness- this in time will not happen anymore. My first couple of pins the muscle would stiffen up a bit and be hard as hell to extend. But after a while it stopped- this is just your body's reaction to the oil, but once it becomes accustomed to it it wont knot up(or it shouldn't if it does your source uses to much BA(benzyl alcohol) which isn't BAD but makes injecting painful is all reallY)

as for 25 guage- good size, 5/8???? I dunno i personally use a 1' needle BUT 5/8 is fine for shoulders, for quads- if you dont have alot of fat around your quads it should work fine
Click to expand...


I seem to get 50/50 info on whether you need 1 inch or 1.5 for quads. Obviously 1 inch would be preferable if it works, but the thing is, how do you really know it's working just as well as 1.5 would? My thing is if it's gonna work just as good I'd rather NOT have to go the extra half inch into myself, lol.
 
I weigh 200 lbs almost no fat 8 percent and have not fat around muscles. I use 25g 5/8 inch pins in the quads and shoulders have worker wll so far. Question 1 is the 5/8 big enough for quads i have heard conflictions on this, question two if the needle is too small could i just do calves and shoulders instead of quads and shoulders?
 
schwellington said:
you SHOULD rotate muscles absolutely. THe outline you used above would work just fine. Nothing you can do for the stiffness- this in time will not happen anymore. My first couple of pins the muscle would stiffen up a bit and be hard as hell to extend. But after a while it stopped- this is just your body's reaction to the oil, but once it becomes accustomed to it it wont knot up(or it shouldn't if it does your source uses to much BA(benzyl alcohol) which isn't BAD but makes injecting painful is all reallY)

as for 25 guage- good size, 5/8???? I dunno i personally use a 1' needle BUT 5/8 is fine for shoulders, for quads- if you dont have alot of fat around your quads it should work fine
Click to expand...

so quick Q bro, would you say pinning quads only is fine as long as you switch them up each injection day, say right quad thursdays, left quad mondays. or is it better to incorporate another muscle group and have 4 sites?
 
incorperate glutes into the rotation or delts


5/8 should be fine for your quads- you do not have skin/endodermus/fat under your skin(3 things that come before muscle) at your bf/weightfter injection as a reaction to BA in the gear.





you will know its working because your leg should tighten up day a
 
Is it a good idea to avoid pinning areas with a lot of body hair? For instance my quads are fairly hairy, probably not a good idea to pin there, I seem to break out in the quads anyways, from increased sweat and what not.
 
You must log in or register to reply here.
Back
Top