Is there a trick to the 2ml Vials? I have to push so hard to get through the stopper, that the needle gets bent and rips through the skin, requiring a lot of force! It's not pleasant. Lol
I've used all kinds of 3 ml vials with growth and peptides and never had this problem. Are they growth vials? Thinking you may have to swap needles, drawing and pinning with different ones.Is there a trick to the 2ml Vials? I have to push so hard to get through the stopper, that the needle gets bent and rips through the skin, requiring a lot of force! It's not pleasant. Lol
Yeah, the Chinese HGH vials. I'll try to find some luer lock slin needles. Otherwise, I'm guessing I'll have to use a pen instead of syringes?I've used all kinds of 3 ml vials with growth and peptides and never had this problem. Are they growth vials? Thinking you may have to swap needles, drawing and pinning with different ones.
The slin syringes I have are with the needle built in. I have 23g luer needles and 1ml syringes, but poking a hole that big twice a day isn't appealing. I ordered some 30g 1/2" luer needles to inject with. I'll make the slin pin work til then. Just wanted to be sure there wasn't a trick I didn't know about. Thanks!Draw with a 25g and inject with the slin
Yeah, the ones with the needle built in suck. The trick is to use the luer lock ones and swap them out as you've described.The slin syringes I have are with the needle built in. I have 23g luer needles and 1ml syringes, but poking a hole that big twice a day isn't appealing. I ordered some 30g 1/2" luer needles to inject with. I'll make the slin pin work til then. Just wanted to be sure there wasn't a trick I didn't know about. Thanks!
Wow, how did I not think of this? This is why I love this forum! Thanks a bunch!Just pull the plunger out and filler up! That's how I do it.
Maybe I did something wrong? I lost two of the three iu's I put in.Just pull the plunger out and filler up! That's how I do it.
Whaaat...?Maybe I did something wrong? I lost two of the three iu's I put in.
I pulled the plunger out of the slin pin and when I squirted the HGH in, most of it dripped out before I could put the plunger back.Whaaat...?
if you have any regular luer lock syringes, draw up all the GH at once. Get however many syringes you need ready. Take the drawing needle off and pull it into the slin pin from the top of the drawing syringe.I pulled the plunger out of the slin pin and when I squirted the HGH in, most of it dripped out before I could put the plunger back.
Video yourself doing this. I’ve backloaded pins a ton and have never seen this. Maybe I am misunderstandingI pulled the plunger out of the slin pin and when I squirted the HGH in, most of it dripped out before I could put the plunger back.
This method works great with oil, but the water runs right through into the cap before you can get the plunger in the back end.Video yourself doing this. I’ve backloaded pins a ton and have never seen this. Maybe I am misunderstanding
Ahhhh makes senseThis method works great with oil, but the water runs right through into the cap before you can get the plunger in the back end.
I'm using a 29g. I've never had one bend in a 10ml or 30ml vial. The 2ml vials have very thick tops! Like, insanely thick and hard!Would 29 ga slin pins maybe work better/not bend as easy? Assuming you are using 30
I hate to have to ask this (but I must)....I'm using a 29g. I've never had one bend in a 10ml or 30ml vial. The 2ml vials have very thick tops! Like, insanely thick and hard!
Yeah, they are standard flip top vials. I'll try to decap one and cut one in half to show how thick they are.I hate to have to ask this (but I must)....
Are you sure you aren't poking through a (non-metal) cap?
Mmmmmm...... Corona.Mmmmmm ....... Bats.
General Tso's Kitten.
Yeah, if I miss the center, it's all over for sure! The center is still quite thick though and definitely blunts the point of the pin. It doesn't slide into the skin, it must be forced through.So I was just thinking. With my gh I have to get it right in the center or the caps are quite thick. Are you just hitting the sides? I’ve done it with my gh and had to pull back and try again
That uhhh .....Yeah, if I miss the center, it's all over for sure! The center is still quite thick though and definitely blunts the point of the pin. It doesn't slide into the skin, it must be forced through.
Eh? I'm saying, even when I hit dead center, it is still so thick that it destroys the pin.That uhhh .....
.... that's what she said.
Fuk, I totally didn't get it til just now.LOL.
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
11-OXODERM dosage equal to 2ml XI-KT | Anabolics | 18 | ||
2ml off test e | Cycle Logs | 6 | ||
Trenazone Cycle Start. 1.5ml - 2ml | Anabolics | 0 | ||
1mg of IGF-1 should be reconstituted with 1mL, 2mL, 5mL AA???? | IGF-1/GH | 15 | ||
holy s--t slin overdose 12ml | IGF-1/GH | 21 |