Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

3,3-azo-17a-methyl-5a-androstan-17b-ol

ccrunkle

ccrunkle

New member
Hey i came across this supplement that comes out tomorrow and found it interesting. It is called Triumphalis which is Methyldiazirinol. Its said to be very similar to Superdrol in its Anabolic/Androgenic Ratio. Anyone know anything about this or anything? Thanks!
 
I seriously doubt this stuff being stable for a reasonable amount of time.
 
Patrick Arnold said:
it could be explosive
Click to expand...

Eh, I doubt it. I've been working with a lot of diazos recently/currently and they're not as scary as everyone says... especially if alpha to an ester, that stuff is stable at well over 60 *C, ground glass joints, everything.
 
Check edit, but I would agree. If it were explosive after N2 extrusion, I doubt they would have made it to the capping stage. Probably a lot of wurtz-like coupling with the carbenes though.
 
i use a reagent with diazomethane in it to derivatize ursolic acid so i can test it on my gc/ms. i use it in the hood cuz i am worried. is diazomethane really that scary?
 
Patrick Arnold said:
i use a reagent with diazomethane in it to derivatize ursolic acid so i can test it on my gc/ms. i use it in the hood cuz i am worried. is diazomethane really that scary?
Click to expand...
Oh ya, diazomethane is probably the worst for safety precautions outside of maybe t-butyllithium and methyl isocyanate. You need the diazomethane glassware kit and everything. But if you were to use TMS diazomethane however, then it's relatively innocuous. I still wouldn't try to use it as a grease for ground glass joints though :D Hydrazine isn't as bad as everyone says though.
 
Beejis60 said:
Oh ya, diazomethane is probably the worst for safety precautions outside of maybe t-butyllithium and methyl isocyanate. You need the diazomethane glassware kit and everything. But if you were to use TMS diazomethane however, then it's relatively innocuous. I still wouldn't try to use it as a grease for ground glass joints though :D Hydrazine isn't as bad as everyone says though.
Click to expand...

I've worked with butyl lithium. Scary stuff. Had a septum cap leak on me coming out of the dry box, it caught an aluminum pan on fire it burned so hot.
 
Butyllithium is essentially water when compared to t-butyllithium. Some retarded bitch died from using it like 1-2 years ago. Gives pyrophoricity a whole new meaning, though butyllithium is still pretty pyrophoric. Diazomethane is PRETTY damn explosive though. I would never work with it and I've worked with a ton of "dangerous" chemicals. TMS diazomethane FTW though. Ya it's a bit more expensive but probably a million times more stable. Plus I hate blast shields.
 
Beejis60 said:
Butyllithium is essentially water when compared to t-butyllithium. Some retarded bitch died from using it like 1-2 years ago. Gives pyrophoricity a whole new meaning, though butyllithium is still pretty pyrophoric. Diazomethane is PRETTY damn explosive though. I would never work with it and I've worked with a ton of "dangerous" chemicals. TMS diazomethane FTW though. Ya it's a bit more expensive but probably a million times more stable. Plus I hate blast shields.
Click to expand...


yeah i think TMS diazomethane is what i use. Its a yellow liquid. Wikipedia says someone died after eating a hamburger that was near a fume hood where alot of diazomethane was generated. They say dont eat where you **** well dont eat where you do chemistry
 
Patrick Arnold said:
yeah i think TMS diazomethane is what i use. Its a yellow liquid. Wikipedia says someone died after eating a hamburger that was near a fume hood where alot of diazomethane was generated. They say dont eat where you **** well dont eat where you do chemistry
Click to expand...

Ya, TMS diazomethane doesn't need the special glassware and is MUCH safer than legitimate diazomethane.
Meh, I sometimes eat by my hood if I'm slammed with shyt to do. And I often set my coffee cup down in the hood too if I'm doing something that needs more than one hand.

Details...
 
Beejis60 said:
Ya, TMS diazomethane doesn't need the special glassware and is MUCH safer than legitimate diazomethane.
Meh, I sometimes eat by my hood if I'm slammed with shyt to do. And I often set my coffee cup down in the hood too if I'm doing something that needs more than one hand.

Details...
Click to expand...


do you eat on the toilet too?
 
When you guys talking about drinking coffee in the hood, you are talking about Compton, right?
 
bdcc said:
When you guys talking about drinking coffee in the hood, you are talking about Compton, right?
Click to expand...

That's what I took it as. I sometimes eat my soul food in the hood.
 
Off topic but PA, do you know chemists who've blown **** up by accident? Like is that a common thing?
 
Quadzilla99 said:
Off topic but PA, do you know chemists who've blown **** up by accident? Like is that a common thing?
Click to expand...


we have had three massive explosions throughout the years that easily could have killed people

and our old production manager was adding sodium methoxide to a reactor at his old job when it ignited and blew up in his face. he has burns all on his face

chemistry is dangerous
 
Patrick Arnold said:
do you eat on the toilet too?
Click to expand...
Just chocolate.
bdcc said:
When you guys talking about drinking coffee in the hood, you are talking about Compton, right?
Click to expand...
:facepalm:
Quadzilla99 said:
Off topic but PA, do you know chemists who've blown **** up by accident? Like is that a common thing?
Click to expand...
Did you not read what I wrote? Some bitch died (burned to death) from using t-butyllithium improperly.
Patrick Arnold said:
we have had three massive explosions throughout the years that easily could have killed peopleand our old production manager was adding sodium methoxide to a reactor at his old job when it ignited and blew up in his face. he has burns all on his facechemistry is dangerous
Click to expand...
Wait. Did he make it fresh or was it powdered NaOMe? I always make it fresh at -78 *C to avoid flashing.However, I always add Pd/C to the alcohol I'm performing the reaction and it always gets this cool mini-explosion of flame out the top of the flask for only a second, then it burns out. However, I had a pretty intense ether fire once; recrystallizing something in 2L of ether on a hot plate. A little solvent popped out of the 4L neck, hit the hot plate and just lit up my hot plate, the vapors, the ether in the flask and everything else. Even my tygon tubing was on fire. I covered the flask with a bigass beaker and all it did was burn around the flask. I hit it with the extinguisher with the flask still covered, finished my recrystallization like a boss, then cleaned up later.
 
Beejis60 said:
Just chocolate.:facepalm:Did you not read what I wrote? Some bitch died (burned to death) from using t-butyllithium improperly.Wait. Did he make it fresh or was it powdered NaOMe? I always make it fresh at -78 *C to avoid flashing.However, I always add Pd/C to the alcohol I'm performing the reaction and it always gets this cool mini-explosion of flame out the top of the flask for only a second, then it burns out. However, I had a pretty intense ether fire once; recrystallizing something in 2L of ether on a hot plate. A little solvent popped out of the 4L neck, hit the hot plate and just lit up my hot plate, the vapors, the ether in the flask and everything else. Even my tygon tubing was on fire. I covered the flask with a bigass beaker and all it did was burn around the flask. I hit it with the extinguisher with the flask still covered, finished my recrystallization like a boss, then cleaned up later.
Click to expand...

I am pretty sure it was powdered sodium methoxide

Anyway, you were heating ether on a hot plate? NEVER heat ether on a hot plate!! I learned this back in new jersey. It caught on fire like you said and it burns very hot and very intensely. I put it out with extinguisher. Good lord man. Use a hot water bath or something
 
Patrick Arnold said:
I am pretty sure it was powdered sodium methoxide

Anyway, you were heating ether on a hot plate? NEVER heat ether on a hot plate!! I learned this back in new jersey. It caught on fire like you said and it burns very hot and very intensely. I put it out with extinguisher. Good lord man. Use a hot water bath or something
Click to expand...

Ya, and the vapor is kinda dense so it's pretty easy to light up. I now use a heat gun or a rotovap bath.
Powdered NaOMe is pretty hygroscopic and I suppose it's safer than preparing it or at least having to store pounds of sodium 0 and potential runaway. But I'm surprised to hear about a runaway exotherm with just adding NaOMe to methanol.
 
Beejis60 said:
Ya, and the vapor is kinda dense so it's pretty easy to light up. I now use a heat gun or a rotovap bath.
Powdered NaOMe is pretty hygroscopic and I suppose it's safer than preparing it or at least having to store pounds of sodium 0 and potential runaway. But I'm surprised to hear about a runaway exotherm with just adding NaOMe to methanol.
Click to expand...


i probably got the story wrong. maybe he was adding sodium to methanol to make it
 
Patrick Arnold said:
we have had three massive explosions throughout the years that easily could have killed people

and our old production manager was adding sodium methoxide to a reactor at his old job when it ignited and blew up in his face. he has burns all on his face
chemistry is dangerous
Click to expand...
Read that carefully all of you jagoffs and brochemists. If this can happen to trained and experienced chemists then it sure as hell can happen to you. Just a (not) so friendly heads-up to the idiots that think they can cook meth in their bathrooms and God knows what else invloving dangerous chemicals/ chemical reactions.
 
I believe iron legion is directly affiliated with Anateus labs so I think its going to be a trustworthy company. As for all the chemistry stuff..oh I know exactly what you're talking about..connect the beeper with the bopper majig...excellent *looks around*
 
Ceredumbellum said:
Read that carefully all of you jagoffs and brochemists. If this can happen to trained and experienced chemists then it sure as hell can happen to you. Just a (not) so friendly heads-up to the idiots that think they can cook meth in their bathrooms and God knows what else invloving dangerous chemicals/ chemical reactions.
Click to expand...


i use methanol to clean glassware so there is often methanol in my sink. several times i have thrown stuff with chromium trioxide residue into the sink and have had a fireball come up in my face
 
Patrick Arnold said:
i use methanol to clean glassware so there is often methanol in my sink. several times i have thrown stuff with chromium trioxide residue into the sink and have had a fireball come up in my face
Click to expand...
Chromium waste doesn't go down the sink, noob.
 
In, for more witty banter.
 
On a side note though, would like to see if anyone has more info/links on this compound. Also any thoughts as to starting a test cycle with this for first few weeks, ie..progestinic issues?
 
3clipseGT said:
Prolactin issues?
Click to expand...

thx for catching that, coming up on finals and everything seems to blur together, keep calling my daughter my wife's name too.
 
tilldeath said:
On a side note though, would like to see if anyone has more info/links on this compound. Also any thoughts as to starting a test cycle with this for first few weeks, ie..progestinic issues?
Click to expand...


i dont think 5alpha reduced androgens can have much progestational acitivity
 
so read every post. cliffs, this stuff must of been fun to make. chemicals are dangerous. pa an friends eat and do other stuff in the hood. any old clinical studies on this compound?
 
Ceredumbellum said:
Read that carefully all of you jagoffs and brochemists. If this can happen to trained and experienced chemists then it sure as hell can happen to you. Just a (not) so friendly heads-up to the idiots that think they can cook meth in their bathrooms
Click to expand...

I've watched every episode of Breaking Bad. Dont worry about me, i know what I'm doing...
 
You must log in or register to reply here.
Back
Top