Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

BUSTIN' out test e

im so subbed
 
running fish oil str8 through.

i went to the pharmacy and they looked so confused when i asked them for the type of needle that yall told me to ask for. so im still looking for the needles....

Right now im about 165lbs. I'm looking to hit about 180-190lbs of pure muscle by the time this cycle is over!

I have heard different things for fighting aromatization from test. Should I used adex .25mg eod? or should i use nolva? i heard some people use nolva because they want the estrogen in their system to help their muscles grow but not the bitch tits. I think im leaning towards adex and having nolva on hand.

Looking to rep at least 315 a few times for my bench and deadlift 315 easily by the end of this cycle. I also would like to squat 315 ATG.

I will be eating about 6-8 meals a day and taking coq10, hawthrone, omega-3, glucosamine, vitamins, and at least 2 protein shakes a day and a bannana and a glass of milk every day before bed. LOL

HCG - got it
Test E - got it
Needles (3cc) - looking
HCG needles (1cc) - got it
supplements - got em
cycle support supplements - got em
Clomid - got it
Nolva - waiting
Adex - waiting
DTH - Waiting
Creatine (pct) - got it
T-911 - on standby durring pct if motivation is too low
JP8 - pct standby for the same reason

Planning on Starting this cycle January 1, 2010!
 
jakellpet said:
5 wks deca would be a waste of time - try 10wks of NeoVar stacked with LHJO, you won't regret it.

also, you seem a little short to be running test, think about buying some platform shoes for this cycle.
Click to expand...

why would i run creatine on cycle? shouldnt i save it for PCT? maybe run beta alanine on cycle?

ok i guess i will run creatine on cycle. And Post Cycle as well no?
 
buster0371 said:
i dont got a rubber stopper on my juice container so im not trippin on that.
Click to expand...

Whoa.........stop the presses. You don't have vials or ampules, do you? If you have either those satchets or the plastic tubes, you better know proper aseptic drawing techniques on how to either pre-load all your syringes or know how to transfer your gear into some glass vials. You can't load single syringes out of those satchets or tubes every week. You need to unload all that gear when you puncture the satchet or tube. :bigok:
 
thundergod said:
Whoa.........stop the presses. You don't have vials or ampules, do you? If you have either those satchets or the plastic tubes, you better know proper aseptic drawing techniques on how to either pre-load all your syringes or know how to transfer your gear into some glass vials. You can't load single syringes out of those satchets or tubes every week. You need to unload all that gear when you puncture the satchet or tube. :bigok:
Click to expand...

seriously?I got a little plastic tube with a screw on top. The guy said just wipe it down with an alcohol pad before i open it each time. I cant preload all my syringes because there is enough for 2 cycles in the container. So what do i do big dog?

lets say i wanted to transfer it into a glass vial. Where would i get this vial and should it have a ruber top?

p.s. whats the proper drawing technique?

Or could i pre load all the syringes for this cycle and just leave the rest of the juice in the container for next cycle?
 
Since its in a screw top container I would just skip the injections and take it orally. You wont run the risk an infection from injecting also.

GICH
 
sounds like you need more research under your belt Buster
 
metroba said:
sounds like you need more research under your belt Buster
Click to expand...

you are correct sir. It looks like I got some research to do. Good thing I still have a month before my cycle. All I need now is to figure out how to draw this crap up and where to get my syringes at.
 
buster0371 said:
seriously?I got a little plastic tube with a screw on top. The guy said just wipe it down with an alcohol pad before i open it each time. I cant preload all my syringes because there is enough for 2 cycles in the container. So what do i do big dog?

lets say i wanted to transfer it into a glass vial. Where would i get this vial and should it have a ruber top?

p.s. whats the proper drawing technique?

Or could i pre load all the syringes for this cycle and just leave the rest of the juice in the container for next cycle?
Click to expand...

Clear your pms dumb a$$
 
Buster, dont even give it a month. I say do all the research you need to do to get this thing down right. It doesnt sound like you know what you are doing at all. Dont be stupid and **** yourself up man.
 
metroba said:
Buster, dont even give it a month. I say do all the research you need to do to get this thing down right. It doesnt sound like you know what you are doing at all. Dont be stupid and **** yourself up man.
Click to expand...

i been researching and planning for the past 6 months man. People with way less knowledge out there do it and dont even **** themselfs up.
 
buster0371 said:
i been researching and planning for the past 6 months man. People with way less knowledge out there do it and dont even **** themselfs up.
Click to expand...

doesnt mean you won't. It's not something to toy around with. 6 months of research does not mean you are ready for test. Keep researching and get this sh1t down to a T then do your cycle. Be smart man.
 
metroba said:
doesnt mean you won't. It's not something to toy around with. 6 months of research does not mean you are ready for test. Keep researching and get this sh1t down to a T then do your cycle. Be smart man.
Click to expand...

alright than. you are right. This cycle is put off until how ever long it takes for me to figure EVERYTHING out. I think that might be some time durring the spring hopefully.
 
buster0371 said:
alright than. you are right. This cycle is put off until how ever long it takes for me to figure EVERYTHING out. I think that might be some time durring the spring hopefully.
Click to expand...

You are going to thank me man. I'm glad you arent being stupid and shooting Diesel Test into your ballsack.
 
metroba said:
You are going to thank me man. I'm glad you arent being stupid and shooting Diesel Test into your ballsack.
Click to expand...

hahahah.

ok so imma get a 10ml syringe with a syringe filter and transfer the oil into 10ml vials. There is about 65ml total so ill use about 7 vials.

A question I have is can I open and close each vial as I, over time, use the oil thats in it? Or should I open each vial only once and preload all of the oil into syringes that said vial contains?
 
ok so i ordered some 23g 1.5" pins for my butt, and 25g 1" pins for my delts and legs.

I bought a bunch of vials alcohol pads and a 10ml syringe also.

So the syringe i draw with will also be the syringe i inject with because im lazy.
I will run the vials under warm water so the oil draws up easier!

Can anyone tell me if long term storage in this plastic container is bad for the juice? becasuse its already been sitting in that container for 3 months. I can take a picture of it if necessary.
 
What the Chemist Told me

"when filling syringes its best to do several at a time to maintain sterility, however the product contains antiseptic so there really is no problem. just use an alcohol wipe on the lid before opening and before closing and only put sterile needles in the bottle. thanks."

-The Genious

he also told me

"it may over time knock some out of solution so prior to using you would want to heat the bottle in boiling water for about 10 minutes then keep it warm for about three hours in hot water with shaking."

What is he trying to tell me here?^
 
Yea...the vials are for sterility. Nolva is too high...and clomid is already a serm. Jus wait bro, you could lose a body part injecting unsterile sh't. Google can show you how to preload, inject and everything. Mad videos son...get on it.
 
MrBigPR said:
Yea...the vials are for sterility. Nolva is too high...and clomid is already a serm. Jus wait bro, you could lose a body part injecting unsterile sh't. Google can show you how to preload, inject and everything. Mad videos son...get on it.
Click to expand...

on it bro
 
MrBigPR said:
Yea...the vials are for sterility. Jus wait bro, you could lose a body part injecting unsterile sh't. Google can show you how to preload, inject and everything. Mad videos son...get on it.
Click to expand...

Good advice MrBigPR, as always.
Buster, start here at Invalid Link Removed
Click on "How to administer intramuscular injections".
This site has lots of videos that will walk you through the entire process. Transferring gear, pre-loading syringes and vials. The whole kit and kaboodle. LOL
You can thank me later. Take care bro.
None of us want to see you hurt yourself.
 
buster0371 said:
"when filling syringes its best to do several at a time to maintain sterility, however the product contains antiseptic so there really is no problem. just use an alcohol wipe on the lid before opening and before closing and only put sterile needles in the bottle. thanks."

-The Genious

he also told me

"it may over time knock some out of solution so prior to using you would want to heat the bottle in boiling water for about 10 minutes then keep it warm for about three hours in hot water with shaking."

What is he trying to tell me here?^
Click to expand...

I wouldn't trust that myself bro. I would pre-load every syringe.
You WON'T be able to keep that thing clean no matter how hard you try. I have some Oral Trenbolone that is in the same type plastic tube and it is for either Oral or IntraMuscular Injection. I took it orally. I can tell you that after using it several times, I noticed a hair on the little plastic stopper under the screw cap. I'm sure there was a little bacteria there with it also!!

PRE-LOAD THOSE SYRINGES DUDE!!!!
 
WTF??? i guess im not ready for test either metroba. Ive never seen a plastic bottle with a screw top for sterile gear. Is this some kind of shady UGL thing?
 
thundergod said:
Good advice MrBigPR, as always.
Buster, start here at Invalid Link Removed
Click on "How to administer intramuscular injections".
This site has lots of videos that will walk you through the entire process. Transferring gear, pre-loading syringes and vials. The whole kit and kaboodle. LOL
You can thank me later. Take care bro.
None of us want to see you hurt yourself.
Click to expand...

Great site for information :thumbsup:

//CC
 
mooch2321 said:
WTF??? i guess im not ready for test either metroba. Ive never seen a plastic bottle with a screw top for sterile gear. Is this some kind of shady UGL thing?
Click to expand...

I think buster's gonna need a bag of snortable fina pellets - get some tren rage going bovine-style! :love:
 
thundergod said:
Oh boy, are you ever going to be busy in this thread!!!! :deal:
Click to expand...

You're right...


thundergod said:
Good advice MrBigPR, as always.
Buster, start here at Invalid Link Removed
Click on "How to administer intramuscular injections".
This site has lots of videos that will walk you through the entire process. Transferring gear, pre-loading syringes and vials. The whole kit and kaboodle. LOL
You can thank me later. Take care bro.
None of us want to see you hurt yourself.
Click to expand...

...Invalid Link Removed -just to clearify any confusion.


Thundergod, thanks for the heads-up on this site. Valuable information.

Here is a direct link to the appropriate page: Invalid Link Removed
 
mooch2321 said:
WTF??? i guess im not ready for test either metroba. Ive never seen a plastic bottle with a screw top for sterile gear. Is this some kind of shady UGL thing?
Click to expand...

we all have to learn sometime :p
 
So......what gives Buster???!!! Are you going to go through with this cycle? I was merely trying to help you stay aseptic and clean in this injectable run.
You should do as I suggested and pre-load all your gear into your sryinges. That's all I was implying. Then you're good to go. Just watch those videos on "www.brookpress.org" and learn how to actually do the injections. Then......you're good to go.
At your current level of growth and especially your low bodyfat, this cycle should treat you very nicely.
I would recommend a 4 to 6 week oral run as your waiting for the Test to kick in. You can even run something like Phera or Epistane. If you already have something like that in your stash.

Come back to this thread and let us know what your plans are. We're waiting.......:deal:
 
thundergod said:
So......what gives Buster???!!! Are you going to go through with this cycle? I was merely trying to help you stay aseptic and clean in this injectable run.
You should do as I suggested and pre-load all your gear into your sryinges. That's all I was implying. Then you're good to go. Just watch those videos on "www.brookpress.org" and learn how to actually do the injections. Then......you're good to go.
At your current level of growth and especially your low bodyfat, this cycle should treat you very nicely.
I would recommend a 4 to 6 week oral run as your waiting for the Test to kick in. You can even run something like Phera or Epistane. If you already have something like that in your stash.

Come back to this thread and let us know what your plans are. We're waiting.......:deal:
Click to expand...


WERD....run the cycle. Just cuz you dont know what to do with a screw top vial (i still think that sh!ts crazy!) doesnt mean you need to give up. Thats what these forums are for. Get your ducks in a row and then shoot em with a really big gun!
 
ok everyone! I got all my supplies and sterile vials and syringes and everything. First i will be transfering my juice into the sterile vials with a syringe and a syringe filter. Than I am going to start this cycle February 1st, 2010. I am still trying to completely understand how to mix the hcg with the bac water and all that. But i got my adex, my nolva and clomid, all my syringes and needles, vials, and juice. I cant wait to run 600mg of test e for 12 weeks. I'll be dosing .25mg of adex eod and 250iu of hcg eod.
 
hcg needs to be mixed.

CYCLE STARTING ON FEB 14

also, i ran into an old buddy of mine who has done test before and is willing to help me thhrough it. Although he did not use HCG. He said get ready for the craziest **** ive ever done. He is so stoked for me, especially since im already pretty ripped he says. He says the feeling is just crazy, you feel so energetic and just ready to go all day long. Like an NFL linebacker on standby. ahahahah. he said his libido was so high he was hitting on his girlfriends moms when they would answer the phone, he would hit on random chicks at the mall and actually get with them. he was like, "i think the chicks can like smell it on you or something cuz i was litterly fighting them off when i was at the bars." I got a gf so I'll just be looking foward to the agression(hopefully i dont get into any fights, they dont let you take SERMS in jail) and whatever libido increases i have with her are just a plus!
 
did my first shot today. didnt hurt at all. the needle felt a little bit funny going in but no pain. Its just a damn pain pushing and pulling that thick oil through the small needle. Especially when using a filter.


Anyway, cant wait to see some results!!!!
 
buster0371 said:
did my first shot today. didnt hurt at all. the needle felt a little bit funny going in but no pain. Its just a damn pain pushing and pulling that thick oil through the small needle. Especially when using a filter.


Anyway, cant wait to see some results!!!!
Click to expand...

A little more info please. Like where did you pin it? How much did you pin? What size guage needle did you use? Stuff like that. Toss us a freakin' bone here. LMAO
 
You are guys just arent ready like Buster is. :whip: I kid I kid
 
You must log in or register to reply here.
Back
Top