Need help w drawing from Ampules

[Harry Seaward]

Took my second pin this morning. Couple issues I've been having w Test E 250 mg amps:

(1) It's really hard to draw; you can't turn it upside down so at best you can tilt it to the side and I end up drawing air,expelling air, repeat a&b it's a mess...

(2) I also never can seem to get every drop, and miss a couple. I ended up just swallowing the couple drops (I know that won't do much but if anyone knows what swallowing test e can do pls lmk!), but please let me know the best way to make sure to get it all.

I have a feeling the two issues are related.

Thanks a lot in advance

 

[Harry Seaward]

also: I don't have any filtered needles to draw and avoid picking up glass particles. I don't think most ppl do this anyway, but pls let me know any tips on avoiding catching glass particles / splinters...

 

[kBrown]

also: I don't have any filtered needles to draw and avoid picking up glass particles. I don't think most ppl do this anyway, but pls let me know any tips on avoiding catching glass particles / splinters...

1) Use a amp opener, they are $5
2) filtered needles are not necessary
3) Invalid Link Removed
4) if you can't tip it without spillage, for whatever reason, just angle it. Draw it up very slow.
5) Issue with air and you keep putting the oil back into the amp and re-drawing it, this confused me. Just push the air out of needle.

another video: Invalid Link Removed

 

[Harry Seaward]

1) Use a amp opener, they are $5
2) filtered needles are not necessary
3) Invalid Link Removed
4) if you can't tip it without spillage, for whatever reason, just angle it. Draw it up very slow.
5) Issue with air and you keep putting the oil back into the amp and re-drawing it, this confused me. Just push the air out of needle.

another video: Invalid Link Removed

Thanks so much man, really appreciate the help. I've seen other videos and this one is MUCH better than all the other ones, which also say that you need a filter but 9/10 sources say definitely don't need a filter and it would prob just take a lot more time and some more $.

The Test E does come out a little if I turn upside down, definitely don't want to spill a full one and change my cycle...but I'll try angling it a little more than I have been, especially to get that last couple drops.

Thanks again

 

[jbryand101b]

if you are still putting the left overs down the hatch.

instead, just let them sit under your tongue for as long as possible, try to get those mucus membranes to absorb as much as possible.

 

[Harry Seaward]

if you are still putting the left overs down the hatch.

instead, just let them sit under your tongue for as long as possible, try to get those mucus membranes to absorb as much as possible.

Nice that's a great call, probably absorbs a lot better thanks a lot man. Will do next time if there's a little left over..

 

[machorox123]

he amp cutter will take the glass out of the equation..you could use a bigger pin to draw the oil out and switch to a smaller one to pin it

 

[EasyEJL]

also, most amps (if actual pharmaceutical ones) are slightly overloaded, to the 1.1-1.2ml range to make up for the potential draw losses

 

[Harry Seaward]

also, most amps (if actual pharmaceutical ones) are slightly overloaded, to the 1.1-1.2ml range to make up for the potential draw losses

Thanks guys, damn I'm learning a lot from this thread much appreciated. I bought an amp opener too and I can't friggin' find it. Hopefully it'll turn up...

 

[drinkyboy]

My boys score em with a knife and then put tape around where the score is and just snap it off. They never had any issues with glass before.

 

[kBrown]

he amp cutter will take the glass out of the equation..you could use a bigger pin to draw the oil out and switch to a smaller one to pin it

I recommend this as well. Pretty sure that is standard practice.