Conflicting info

chasec

Pityin' fools since '81
after searching and getting no clear answer, i guess i'll post here. What exactly is the "magic solution" that people put in a tren conversion kit? i've seen everything from straight methanol, to a mix of ba/bb/oil, etc. I refuse to pay somebody for a kit that i allready have the raw materials for. so, anybody know what the "magic solution" is?
 
chasec said:
anybody know what the "magic solution" is?
Click to expand...

It's a mix of BA and BB. Don't bother with the kit method, follow the link in Skye's sig for a kit-free conversion. Use the Invalid Link Removed method and then mix the powder as per the ratios in Skye's post.

Very easy, cheaper, and cleaner stuff.

-kwantam
 
With some it's only BA and a high amount that will hurt when injected. IMO, you are better off mixing your own BA and BB.
Try 3%BA and 15%BB
 
glenihan said:
**** it .. eat the pellets and buy a bra :)
Click to expand...

Only if you're eating synovex... fina pellets don't have much in them except cellulose.

So basically, it's like eating fina and some typing paper.

-kwantam
 
i've never looked into a fina conversion, but i thought they started putting estradiol into them?
 
Just hella hard on your liver if you go the oral route.

I really need to get into this chemistry crap. :think:
 
Cuffs said:
Just hella hard on your liver if you go the oral route.

I really need to get into this chemistry crap. :think:
Click to expand...
fina is not liver toxic taken orally. It is exspensive however as you only have about a 25% absorbsion rate.
 
glenihan said:
i've never looked into a fina conversion, but i thought they started putting estradiol into them?
Click to expand...

You can still buy real component-th and finaplix-h, both of which contain no estrogen. I believe revalor-h and revalor-s are the ones with estradiol added.

-kwantam
 
Ok so anyone know what is in the solubizer when making synovex into Test Prop?

I hate paying $120 for a kit. It seems impossible that only 2 guys have figured this out and now sell kits.

Isn't there ANYONE else who knows PLEASEEEEEEEEEEEEEEEEE :)


CROWLER
 
that's basically the question i'm asking. after reading sky's posts i believe it is methyl alcohol (heet, yellow bottle).
 
CROWLER said:
Ok so anyone know what is in the solubizer when making synovex into Test Prop?

I hate paying $120 for a kit. It seems impossible that only 2 guys have figured this out and now sell kits.

Isn't there ANYONE else who knows PLEASEEEEEEEEEEEEEEEEE :)


CROWLER
Click to expand...
According to one of my buddies who's a chem. wizard, it's either sodium hydroxide (NaOH) or potassium hydroxide (KOH). I just explained about the estrogen in Syno and told him about the estrogen solubolizer. After giving him some details on a conversion, I asked him what his thoughts were as far as what's in the ES. Those two compounds were the answer he gave me, I don't know if he is right or wrong.
 
chasec said:
that's basically the question i'm asking. after reading sky's posts i believe it is methyl alcohol (heet, yellow bottle).
Click to expand...


You still have to use heet with a kit. The 'secret' solubizer is what is not known.
 
kwantam said:
It's a mix of BA and BB. Don't bother with the kit method, follow the link in Skye's sig for a kit-free conversion. Use the Invalid Link Removed method and then mix the powder as per the ratios in Skye's post.

Very easy, cheaper, and cleaner stuff.

-kwantam
Click to expand...
fina conv. using ba/bb dissolving the pellets and then filtering w/o using the crystal fina works pretty darn good too. you end up losing more fina thru the crystal fina method
 
CROWLER said:
Ok so anyone know what is in the solubizer when making synovex into Test Prop?
Click to expand...

It's sodium tert-butoxide.

The reason that everyone suggests purchasing it from eagle research is because reagent-grade (i.e., highly pure) is extremely expensive and only available in large amounts.

-kwantam
 
s.norman said:
fina conv. using ba/bb dissolving the pellets and then filtering w/o using the crystal fina works pretty darn good too. you end up losing more fina thru the crystal fina method
Click to expand...

The crystal fina method yields purer final product, but you're right, the yield is somewhat lower. Personally, I'm willing to sacrifice 10% yield in order to get purer product, but everyone has a different utility function regarding cost vs. safety.

Ideally, everyone would do lots of research, understand the ramifications of both methods, and make a decision based on their predilections. Unfortunately, most people just buy the kit (which has WAY too much ba/bb) and get tren cough instead.

-kwantam
 
Snachito said:
According to one of my buddies who's a chem. wizard, it's either sodium hydroxide (NaOH) or potassium hydroxide (KOH). I just explained about the estrogen in Syno and told him about the estrogen solubolizer. After giving him some details on a conversion, I asked him what his thoughts were as far as what's in the ES. Those two compounds were the answer he gave me, I don't know if he is right or wrong.
Click to expand...

Well, he's kind of right and kind of wrong.

Either of the compounds he listed will work to make the estrogen water soluble, but they will also strip the ester off of the test. In fact, NaOH (a.k.a. lye) is what's used in the TNE conversion. Sodium t-butoxide won't react nearly as much with the test (presumably because of steric hindrance, though that's completely ex recto---I haven't drawn it out or anything), so it does what you want (makes the estrogen soluble) without doing what you don't want (removing the ester from the test).

-kwantam
 
ok, i have no use to solubilize estrogen. i bought a bunch of component-TH which contains only 200mg/trenbolone acetate per dose, no prop/estradiol. so to straighten this mess of a thread out correct me if i'm wrong.

1. crush pellets and mix in METHYL ALCOHOL until completely dissolved
2. THAN follow crystal fina method.

really all i needed to know was would the methyl alcohol be reccommended to dissolve the pellets in?
 
kwantam said:
Well, he's kind of right and kind of wrong.

Either of the compounds he listed will work to make the estrogen water soluble, but they will also strip the ester off of the test. In fact, NaOH (a.k.a. lye) is what's used in the TNE conversion. Sodium t-butoxide won't react nearly as much with the test (presumably because of steric hindrance, though that's completely ex recto---I haven't drawn it out or anything), so it does what you want (makes the estrogen soluble) without doing what you don't want (removing the ester from the test).

-kwantam
Click to expand...
Thank you for the info kwantam! You know your chemistry!

I know ER mad their ES even more concentrated, so when I received it I thought for sure some of it spilt in the box. It works good though, never had any estrogen issues bother me yet! I also use Nolva and Arima during cycle, but I still have to credit their ES for getting most of the estro out.
 
chasec said:
ok, i have no use to solubilize estrogen. i bought a bunch of component-TH which contains only 200mg/trenbolone acetate per dose, no prop/estradiol. so to straighten this mess of a thread out correct me if i'm wrong.

1. crush pellets and mix in METHYL ALCOHOL until completely dissolved
2. THAN follow crystal fina method.

really all i needed to know was would the methyl alcohol be reccommended to dissolve the pellets in?
Click to expand...
I know of another method, for crystal fina, it's pretty easy.

And yes heet is recommended to dissolve the Fina
 
chasec said:
really all i needed to know was would the methyl alcohol be reccommended to dissolve the pellets in?
Click to expand...

Yup. Get the yellow HEET bottles from your local auto parts store.

-kwantam
(Here in south TX they look at you funny when you buy fuel line de-icer. :D)
 
DAMN I just read the crystal Fina way of doing it. That is ALOT of extra time and steps to do. I don't understand the reasoning. I see he says that it doesn't hurt as much as the regular way of doing tren.

Does tren hurt anyone. Heck I use it to cut the pain in prop so I don't know.

Then his finished product doesn't look any clearer than what you get when you do it the easier way.

Ok edjamicate me what is the point?


CROWLER
 
i made my tren the regular way (not crystal fina) and it worked great-it was not painful nor did i get the tren cough
 
I made my tren from pellets at 100mg/ml dissolving in just 3% BA and 12% BB and it came out about as painless as any tren I have ever shot.

I used cottonseed oil for the oil component...which I also finds makes anything a little less painful.

regards,
COTC

PS: Anymore info on the yellow HEET bottles from the auto parts store...I have never really looked into it but I'm always looking to educate myself further with homebrew techniques :type:
 
CarryOnTheChaos said:
PS: Anymore info on the yellow HEET bottles from the auto parts store...I have never really looked into it but I'm always looking to educate myself further with homebrew techniques :type:
Click to expand...

"Invalid Link Removed"

Basically, you dissolve the pellets in HEET, filter out the cellulose, precipitate the tren with water, filter, dry. The end product is tren ace powder.

-kwantam
 
You must log in or register to reply here.
Back
Top