CEL form bottle

lifthard24

New member
can someone please post a picture of what one full pump looks like...

Mine is very inconsistent and is definitely not working correctly...this would be greatly appreciated!
 
I have the same problem. First pump goes great then the second pump sticks down and you only get a small squirt.

If you loosen the cap on the bottle after each pump, it pops back up for another correct shot. Give that a try see how it goes.
 
Interesting..... havent had the problem with mine. I keep it in dry area and make sure to shake the bottle real good before applying. Hopefully its not a trend with the bottles....
 
ive kind of had this problem, some times after a squirt it doesn't fully re-fill itself. Then the next one is a quarter squirt or so. Basically you have to baby it, and also know what one full squirt looks like.
 
Harland said:
ive kind of had this problem, some times after a squirt it doesn't fully re-fill itself. Then the next one is a quarter squirt or so. Basically you have to baby it, and also know what one full squirt looks like.
Click to expand...



Very strange. We'll chekc on it
 
yeah its not really that big of a deal, i would say it happens maybe 1 out of every 4/5 times, but since i know what one squirt looks like i just try to even it up.
 
My bottle did not start acting up until it was about half finished. I have to watch the pump pop back up or I'd get half a squirt. I loosen the top if it doesn't pop up, then it come back to full up.
I'm on my second bottle which is also hanging up a little, but the squirts are way stronger than the first bottle. Sometimes it blows out of my palm during the pump out. The stuff works well so I can deal with the pump.
Like Harland wrote, you know how much should be coming out.
 
Wetdawg said:
My bottle did not start acting up until it was about half finished. I have to watch the pump pop back up or I'd get half a squirt. I loosen the top if it doesn't pop up, then it come back to full up.
I'm on my second bottle which is also hanging up a little, but the squirts are way stronger than the first bottle. Sometimes it blows out of my palm during the pump out. The stuff works well so I can deal with the pump.
Like Harland wrote, you know how much should be coming out.
Click to expand...

yeah i just put the pump as close to the application area as possible, and pump real slowly. since ive been doing that, ive had no problems. :D
 
Harland said:
yeah i just put the pump as close to the application area as possible, and pump real slowly. since ive been doing that, ive had no problems. :D
Click to expand...

this is good advice...i opened my bottle up and saw that my tube was pinched at the very bottom, so i un-pinched it and it is working much better now...hopefully the second bottle wont have the pinch...

stuff is awesome though!
 
You must log in or register to reply here.
Back
Top