Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

How do you Inject?

What is your Injecting method?

  • Total voters
    153
pistonpump

pistonpump

Banned
Do you pin with a fast jab and get er done or do you ease in gently and slowly? and maybe your reason for the method you use...?
 
I hold it like a knife and stab myself! lol No i hold it almost like a dart and slowing push it into the muscle.
 
wow chaps you are all over this board lately. I didnt even finish posting the poll yet and you already responded!!!!! am i sensing an AM.com addiction???lol
 
Go nice and slow bro. I like a 23guage x 1 1/2" on my glutes, 25 guage 1" on my delts. I pull my juice with a 18 though. I like to put my juice in a heating pad for a minute before I pin. It makes all the difference in the world. There is not set way to do it but this has worked well for me for a long time. Slide me a pm if you need more help.

Bis
 
agreed ^^^^ all save one point.. .18g will chew up the Butyl faster than a 20g... you may think the change of guage is negligible, but I learned fast there is a major difference in damage to the seal... 18g are good for brewing as you don't need to repeatedly poke when you transfer and filter... The only other case I could see an 18g used without problems is when using glass amps.

Generally speaking, 20g's are drawmasters... 23-25g's for pinning.


Slow and Steady.. Calm and quiet... Cleanly and distraction free... that's the way I prefer.
 
Ubiquitous said:
agreed ^^^^ all save one point.. .18g will chew up the Butyl faster than a 20g... you may think the change of guage is negligible, but I learned fast there is a major difference in damage to the seal... 18g are good for brewing as you don't need to repeatedly poke when you transfer and filter... The only other case I could see an 18g used without problems is when using glass amps.

Generally speaking, 20g's are drawmasters... 23-25g's for pinning.


Slow and Steady.. Calm and quiet... Cleanly and distraction free... that's the way I prefer.
Click to expand...
It's like your medatation time. be one with the needle and the juice.
 
the people that do it fast have never hit a big nerve before, then they don't ever do it again. :cry
 
I go slow and easy... I've been, so far, in the glutes and quads - and never feel the needle going in.. I've yet to try delts but I don't think I can with the particular version of cypionate I'm using. I'm limping 3/4 days after the shot...
 
Skye said:
the people that do it fast have never hit a big nerve before, then they don't ever do it again. :cry
Click to expand...

I tried to shoot into my bi before. I didn't go fast, but it wasn't slow either. My bi twitched so hard I thought it ws going to bust the needle.

Ever since I've been scared to shoot into my bi's and I always make sure to go nice and slow.. what's the rush anyway? :stick:
 
...and take a nice warm/hot shower first...helps loosen up the muscle some...don't want to pin a tense muscle!
 
A hot shower definiteley helps! youd be surprised

When i was about 6 years old some stupid ***** of a nurse that hated children jabbed me in the hamstring. IN THE HAMSTRING! of all places. She absolutely annihlated my sciatic nerve. i coudnt walk for about a week. i have never experienced a pain comparable to that experience in my life.

slow and steady, for the love of god. once you get past the dermal layer you probably wont feel a thing.
 
In my opinion, there is one way to inject, the safe, sterile, and proper way.
 
Last edited:
I do it slow and easy with a 23 gauge dart. I also like to lubricate the needle, goes in like butter and I don't feel it unless I hit a nerve, which only happened once.
 
I draw with a 22 or 23 and pin with a 23 or 25. I don't draw with a bigger pin because I used to use 20g and it was tearing up the stopper on my 20ml vials and I was getting bits of rubber in my syringe.
 
i use a 23g below the waist, 25g above the waist. i rarely ever lubricate it unless the scar tissue is really built up. i hate seeing gear trickle down the needle and get wasted just because im afraid of a little pinch. other than that, nice and easy...like a few said before, if youve hit a nerve before you understand why you go slow.
 
Depedning on how many drinks Ive consumed, I like to tape loaded darts over my bed while I sleep. When the tape fails and the needle falls, It is like Christmas morning! Plunge and sleep!

NOTE TO SELF, SLEEP ASS UP!!

My second favorite method is the rush and pump. AKA THE RUSSIAN PUMP. I load the dart and place it on a desk with a 20lb db holding it in place with the needle sticking off the desk. I get in a four point stance with the needle behind me. On the second hut I blast my azz in reverse and jam the needle up my rectum. Prop works extra fast!!

Third, I play ninja sticks with a friend, whoever blocks the blows worst, gets a surprise injection!

:duel:
 
What size pin do you guys use for calfs? I was using a 1.5inch 22gauge but i just nicked a vein and tried 3 different spots in my outer calf and i had to give up and shoot my glute, this is weird as i've been shooting inner and outter calfs just fine for about 2 weeks now.
 
biscuite said:
Go nice and slow bro. I like a 23guage x 1 1/2" on my glutes, 25 guage 1" on my delts. I pull my juice with a 18 though. I like to put my juice in a heating pad for a minute before I pin. It makes all the difference in the world. There is not set way to do it but this has worked well for me for a long time. Slide me a pm if you need more help.

Bis
Click to expand...
how do you know what tempreture to inject at, and what would happen if you diddn't heat it at all?
 
getreal said:
how do you know what tempreture to inject at, and what would happen if you diddn't heat it at all?
Click to expand...


i would say warmer/as warm as body temp. if you do not heat it, it willl pass through a little slower and possibly you might feel a little more sore the next day as opposed to heating it first.
 
I preload it. Put in the fridge for awhile to get it nice and cold. Use a manly 20 gauge needle. Swirl it around a little. I try to mimic the motion I use with a cotton swab. I hear it gets the oil spread out better and gives you a better chance of feeling the nerves and hitting veins. Top notch style if you ask me.

Why am I the only one that voted drunk style?
 
Drunk style? yeah i would def have to be drunk for that...

I've nicked a vien and hit a nerve a few times,boy does the nerve part suck
 
i can actually feel when i nick a vein . i dont think ive hit a nerve yet thank God. and if i did it mustve not been that bad lol.
 
Ubiquitous said:
agreed ^^^^ all save one point.. .18g will chew up the Butyl faster than a 20g... you may think the change of guage is negligible, but I learned fast there is a major difference in damage to the seal... 18g are good for brewing as you don't need to repeatedly poke when you transfer and filter... The only other case I could see an 18g used without problems is when using glass amps.

Generally speaking, 20g's are drawmasters... 23-25g's for pinning.


Slow and Steady.. Calm and quiet... Cleanly and distraction free... that's the way I prefer.
Click to expand...

Well said, agree 100%.
 
pistonpump said:
i can actually feel when i nick a vein . i dont think ive hit a nerve yet thank God. and if i did it mustve not been that bad lol.
Click to expand...

Hitting a nerve is something you will def know and remember...
besides the sharp pain(no pun intended) depending on what body part from my experiance like a delt shot it was like having an electric stimulator hooked up to me cause it was pulsating like crazy, made my arm shake....so its nice and slow and where there are no visibile viens for me...
 
i originally made this post as a virgin, making each injection style sexual in u en doe ? damn thats a hard word and im not gonna look it up. I also go the slow route in a quiet clean enviroment and always after a warm/hot shower. Its kind of like my special time kinda like prayer (that sounds sad haha).
 
Ubiquitous said:
agreed ^^^^ all save one point.. .18g will chew up the Butyl faster than a 20g... you may think the change of guage is negligible, but I learned fast there is a major difference in damage to the seal... 18g are good for brewing as you don't need to repeatedly poke when you transfer and filter... The only other case I could see an 18g used without problems is when using glass amps.

Generally speaking, 20g's are drawmasters... 23-25g's for pinning.


Slow and Steady.. Calm and quiet... Cleanly and distraction free... that's the way I prefer.
Click to expand...

I'm going to switch to a 25 i think to minimize scar tissue, i'm finding it hard to get the right spots now using a 22 gauge 1.5 inch, hitting a nerve in my quad KILLED. Think for calfs 1 inch would be fine?
 
Forgot about this thread. I personally hate pinning my calves if I don't need to. I have hit nerves there that have had me jump. If you pin, pin the outside. 25g 1" if fine.
 
Slow, until i feel muscle penetration, then i go faster, sometimes i will feel pain at this point, so i stop for a few seconds until the pain subsides then start pushing slowly again.
 
BigMatty said:
i would say warmer/as warm as body temp. if you do not heat it, it willl pass through a little slower and possibly you might feel a little more sore the next day as opposed to heating it first.
Click to expand...
When I had an injection done one time, this guy did it for me (test e by the way) and he heated it up, but the thing was he put it in the syringe first then heated it, I was told that it was a bad idea to do it that way and if so why?
 
getreal said:
When I had an injection done one time, this guy did it for me (test e by the way) and he heated it up, but the thing was he put it in the syringe first then heated it, I was told that it was a bad idea to do it that way and if so why?
Click to expand...
sterility issues.
 
sikboy said:
Slow, until i feel muscle penetration, then i go faster, sometimes i will feel pain at this point, so i stop for a few seconds until the pain subsides then start pushing slowly again.
Click to expand...
thats a detailed breakdown of how i do it too. You can tell when you are in muscle and sometimes it gets tougher to push so you have to push slower but you can go faster as you are pretty much in the safe zone once you are deep in the muscle. I always go slow thru the top layer tho'
 
pistonpump said:
thats a detailed breakdown of how i do it too. You can tell when you are in muscle and sometimes it gets tougher to push so you have to push slower but you can go faster as you are pretty much in the safe zone once you are deep in the muscle. I always go slow thru the top layer tho'
Click to expand...
Ya, as soon as the needle penetrates muscle, it can be pretty much plain sailing from there and i can usually push pretty fast at that point.

The most painful part is skin penetration, that stings like hell sometimes.
 
Definately nice and easy. Need to be in control!! Hitting a nerve sucks so the slower the better!

I use a 20G pin to draw and 25G to inject. Taking a hot shower before is key, it makes the injection near painless and the needle slides in very easy. Being relaxed as possible is always good!
 
I Like To Hold It Liek A Dart And Give It A Nice Smooth Thrust To Get Through The Skin.. After That Slow And Smooth... I Like To Pump It Real Slow Too(especialy With The Wter Based).. Never Really Had Any Problems With Pain Or Bruising...
 
This is all very interesting to me as I don't really know about this area of using.

How do you not hit a nerve? How do you make sure you don't hit a nerve? Is there a guide or how to on how to do this stuff?

Not that I'm going this route but am intrigued and love to learn almost anything.

Much Love,

Neoborn
 
neoborn said:
This is all very interesting to me as I don't really know about this area of using.

How do you not hit a nerve? How do you make sure you don't hit a nerve? Is there a guide or how to on how to do this stuff?

Not that I'm going this route but am intrigued and love to learn almost anything.

Much Love,

Neoborn
Click to expand...


well there are some nerves that are basic in all humans, like the sciatic. These "mapped" nerves are easily avoided but occasionally you can hit other nerves. In that case its luck of the draw. Youll know when you do.
 
Neo, you get to know your sweet spots, so to speak.. but once in a while you'll twitch.. in that case you pull back and slightly redirect.

That's what some user told me.. I'm completely natural and an upstanding citizen.
 
Ubiquitous said:
Neo, you get to know your sweet spots, so to speak.. but once in a while you'll twitch.. in that case you pull back and slightly redirect.

That's what some user told me.. I'm completely natural and an upstanding citizen.
Click to expand...

How deep do you go with the needle? How do you know when your 'in' the right spot? Does this process create alot of scare tissue? Is scar tissue why you rotate your injection points? Do you just insert and then push, I take it you don't draw back like IV injections?

How did 'your friends' learn how to do this process? Are there any good books / reading on all of this?

Much Love,

Neoborn
 
You must log in or register to reply here.
Back
Top