dpannell85
New member
- Awards
- 0
Hey just ordered a scale, gelatin caps, and 10 grams of sdrol powder any tips on what i should mix into it for a good mix would a epistand sdrol mix be good? Looking for personal opinons just curious
No, that's called GETTIN SWOLE SON.Lol I hope he doesn't end up with 50mg per cap. That's BLACK LIVER.
Fock it then where is the methyltren at?!?No, that's called GETTIN SWOLE SON.
Bahahaha
I hope you're talking about SuperMethyl1TrenTestosterone?!?Fock it then where is the methyltren at?!?
F*ck yeah! Don't forget to add the coke-infused halotestin pills, those get u swole as fock and super shredded.I hope you're talking about SuperMethyl1TrenTestosterone?!?
It's in muh system! Lol
Damn I'm jealous, wish I could make my own pills with raw powder lol.lol the scale i have does .01 so for 25 mg caps shouldnt be that difficult. I was more curious if sdrol and epistane would be a good mix or just better off with sdrol. I save a lot of money by capping them plus its a reliable source so im getting quality product.
Make sure you calibrate your scale *nickels weigh 5.0 grams*, if not you are going to either over/under-dose your pills. Also why use caps like someone said, just spoon it into your mouth with water already in there. I also wouldn't be dosing your caps or dosing period with 25mg unless you are used to SD. Now if you wanna make a little extra money, depending on how much powder you have, be that shady dude in the gym that is like "hay u, wunna git hyouge?"lol the scale i have does .01 so for 25 mg caps shouldnt be that difficult. I was more curious if sdrol and epistane would be a good mix or just better off with sdrol. I save a lot of money by capping them plus its a reliable source so im getting quality product.
Goes. 001 the making of the pills and accurately is no issue ive made a lot of pills before just new to prohormones lolIf your scale does .01 how are you going to know if you have 21mg or 29mg per cap? I'm assuming your scale does .01 of a gram...
Most all pocket scales measure in grams, another idea *assuming you have this scale already for another reason...* 20mg of SD and 10mg of Cocaine, now that will be a hellavu workoutIf your scale does .01 how are you going to know if you have 21mg or 29mg per cap? I'm assuming your scale does .01 of a gram...
I have a bowflex in my garage i dont go to the gym...Make sure you calibrate your scale *nickels weigh 5.0 grams*, if not you are going to either over/under-dose your pills. Also why use caps like someone said, just spoon it into your mouth with water already in there. I also wouldn't be dosing your caps or dosing period with 25mg unless you are used to SD. Now if you wanna make a little extra money, depending on how much powder you have, be that shady dude in the gym that is like "hay u, wunna git hyouge?"
Lol should we do some math and see how expensive that would be?Most all pocket scales measure in grams, another idea *assuming you have this scale already for another reason...* 20mg of SD and 10mg of Cocaine, now that will be a hellavu workout
What your suggesting is 500x what he is wanting to put in there, also 500x the average dose of SD? 10g = 10,000mgUse a balance, not a scale. Put a loaded Known 10g cap on one side, and an empty cap on the other. Then start slowly adding powder to the empty cap side until it balances to even. You doubt need to load the cap, just wash the powder down with a drink.
Your welcome.
U snort this much SD for breakfast, what's wrong with that? Lmao but seriously I think he just wrote that wrong.What your suggesting is 500x what he is wanting to put in there, also 500x the average dose of SD? 10g = 10,000mg
Do you have to mix powder in a oral situation or is it preferenceYou put raw powder into an oral solution. 1g into 99ml = 10mg/ml
You put raw powder into an oral solution. 1g into 99ml = 10mg/ml
Do you have to mix powder in a oral situation or is it preference
For your product in question, this is the best method. Quick, fast, easy and accurate.... all what you need when dealing with SD.Your margin of error is greatly diminished when producing an oral solution. 1 gram in 99 ml of solution will produce 10mg/ml. You cannot accurately measure 10mg with an innexpensive scale and then place in a capsule.
Yes. It is a preference, as I prefer making intelligent decisions.
Its an FN typo relax. Should have been 10Mg. Geez .....What your suggesting is 500x what he is wanting to put in there, also 500x the average dose of SD? 10g = 10,000mg
Your margin of error is greatly diminished when producing an oral solution. 1 gram in 99 ml of solution will produce 10mg/ml. You cannot accurately measure 10mg with an innexpensive scale and then place in a capsule.
Yes. It is a preference, as I prefer making intelligent decision/QUOTE]
Lol so i can shoot this stuff my ass and call it a day
don't mix prohormones... put them in separate caps, nothing to gain from mixing.
You put raw powder into an oral solution. 1g into 99ml = 10mg/ml
I looked into the "Specifications" of this compound (I would think all PD/DS are the same) as far as soluble to make a oral solution.Your margin of error is greatly diminished when producing an oral solution. 1 gram in 99 ml of solution will produce 10mg/ml. You cannot accurately measure 10mg with an innexpensive scale and then place in a capsule.
Yes. It is a preference, as I prefer making intelligent decisions.
Lol i know just ****in aroundIt's an oral solution. What you put in your ass is entirely your own business.
Just mix it in some oil or get yourself some high proof alcohol.I looked into the "Specifications" of this compound (I would think all PD/DS are the same) as far as soluble to make a oral solution.
What would you suggest should be used in making the oral solution?
Obviously not water since it's only "Slightly soluble in water" from the specifications I found.
Specifications
Methasterone / Superdrol
Molecular formula: C21H34O2
Molecular weight: 318.4935
Description: White Crystalline Powder
white or almost white crystalline powder
Slightly soluble in water, methanol; very slightly soluble in ethanol, chloroform
Specification: Assay: 99.92%
Can you elaborate on "oil"Just mix it in some oil or get yourself some high proof alcohol.
I would think NOT on the oil.. You want a consistent mixture, I do not think it would be soluble in oil to a point where you would get a consistent mixture and end up with something unusable, with possibly clumps of the compound.I looked into the "Specifications" of this compound (I would think all PD/DS are the same) as far as soluble to make a oral solution.
What would you suggest should be used in making the oral solution?
Obviously not water since it's only "Slightly soluble in water" from the specifications I found.
Specifications
Methasterone / Superdrol
Molecular formula: C21H34O2
Molecular weight: 318.4935
Description: White Crystalline Powder
white or almost white crystalline powder
Slightly soluble in water, methanol; very slightly soluble in ethanol, chloroform
Specification: Assay: 99.92%
Just mix it in some oil or get yourself some high proof alcohol.
ThanksYou are making this far too scientific and therefor too complicated.
Using an accurate digital scale measure out .5g of powder.
Using a 60 ml glass bottle (ones often used by RC sellers) fill with 49.5ml of EVOO
Place oil in microwave and heat to a very hot a low viscous state.
Pour. 5g of powder into oil, cap, shake very vigorously for several to many minute.
It may not go into solution completely and is quite fine as a suspension. That is why the concentration is so low as to optimize soluability.
Before we start debating it "going bad"...if you use 30mg/day there is not enough time for it to go bad. If it falls out after time, reheat in a very hot water bath and proceed with vigorous shaking and heating.
This is not a pharmacy grade solution. It is simply easy, efficient, rather accurate and effective. Anything more defeats the benefit of cost savings of raw powders. If that is an issue then you may as well just by a manufactured product. Been done dozens of times quite effectively.
Can you elaborate on "oil"
I would think NOT on the oil.. You want a consistent mixture, I do not think it would be soluble in oil to a point where you would get a consistent mixture and end up with something unusable, with possibly clumps of the compound.
Now the “some high proof alcohol” would more than likely work since it says “ethanol”.
But I was really directing the question towards David Dunn since his response seemed the most plausible and detailed.
But all the same, thanks for the input.
^^^You are making this far too scientific and therefor too complicated.
Using an accurate digital scale measure out .5g of powder.
Using a 60 ml glass bottle (ones often used by RC sellers) fill with 49.5ml of EVOO
Place oil in microwave and heat to a very hot a low viscous state.
Pour. 5g of powder into oil, cap, shake very vigorously for several to many minute.