Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Syno to test Prop, heat degradation of TP?

mildain

Member
I recently converted 5c of syno-h to Test prop using the Estro solubizer from one of the board sponsers. Everything went well but I am not seeing any results from the test. My TP is 100mg/ml at 2%ba 20%bb.

I started out taking 150mg eod and now am up to 200mg eod. I get the normal test prop pain that lasts for a couple of days but am not seeing any anabolic or androgenic effects. I'm on my second week and have only gained 3 lbs, which I credit to diet.

I am wondering if I might have degraded the test prop by heating it in boiling water to speed filteration and dissolve the test.

Anyone know why this is? I'd hate to be injecting myself with worthless oil.

......
 
Klaus said:
It should be okay. Although I personally dislike heating my hormones, the temperature of boiling water won't destroy TP. The first two weeks isn't any length of time to notice any significant body compositional changes when using only TP (unless you're mega-dosing). I would bump the dosage back to 150 eod and continue this for another two weeks. If by that time the results are dissapointing, I would then increase the dosage.
Click to expand...

I can always count on you Klaus to answer my stupid ass conversion questions. Thanks bro.

So when you filter you don't heat your solution? It's a pain trying to filter through a syringe filter if it's not heated. You ever try the vaccuum filters? What do ya think of those?
 
There is an idea. I have also used I have also used a millipore sterivex .22um with great results. there not very practical for anything under 50ml though but they are fast
 
That brings up a question that's been bugging me. 22um or 45um for test prop in oil?
I've tried both, and the 22um takes forever and 2 days. I've also had a problem with 22um breaking from too much pressure. 45's should still filter out all the nasties right?
 
mildain said:
I get the normal test prop pain that lasts for a couple of days ......
Click to expand...
That pain is no joke! I was expecting something along the lines of a flu shot, ended up getting something like injecting jabenero sauce. :jaw:
 
Klaus said:
Using the caulking gun method, I filtered 40mL of 200mg/mL test prop.
Click to expand...

Klaus how did you get your test prop in a concentration of 200mg/ml. My TP crashed when I tried that ratio, so I had to dillute it down to 100mg/ml with more oil. I did a ratio of 2%ba 20%bb.

Also anyone know if test prop converted from syno-h is less potent then from Test prop powder? I'm on my third week of it and not feeling much.
 
Klaus said:
I dissolve my test prop in BA and BB before adding the oil. I typically use a ratio of 1.5mL of BB per every gram of test prop. I also use crystals rather than powder, and I use an ultrasonic bath to dissolve the stuff. The 200mg/mL concenration is a bit much however. The pain isn't excruciating as many describe, but it's irritating enough to hinder a workout.

The test prop converted from syno should have the same potency as test prop from a powder source.
Click to expand...

ultra sonic bath, damn you go the hookup klaus
 
You must log in or register to reply here.
Back
Top