john arnold
New member
- Awards
- 0
Is there a ratio and if so what for mixing 1 gram M5aa powder with PEG400? Tried searching but was not able to find the amount to mix with 1 gram M5AA, thanks
Any time.Damn, I must have been high when I answered this post...lol. Thanks Lean One.
Chemo could answer this better, but you need something strong enough to dissolve it and keep it in solution. God, with some of these questions being asked, you have to wonder if you should be homebrewing at all.Scarry.What would be wrong with mixing it with water? I mixed m1,4 with vodka and it seemed to work fine, then I though why not water? Does it dissolve better in other solutions?
What’s so scary about that? I did order PEG400, but as long as the power has an even distribution in the solution I don't see what the problem would be. I can see why someone wouldn't want to use water if they were selling the product, you wouldn't want bacteria to grow in it.Chemo could answer this better, but you need something strong enough to dissolve it and keep it in solution. God, with some of these questions being asked, you have to wonder if you should be homebrewing at all.Scarry.
Like I said. Scary.What’s so scary about that? I did order PEG400, but as long as the power has an even distribution in the solution I don't see what the problem would be. I can see why someone wouldn't want to use water if they were selling the product, you wouldn't want bacteria to grow in it.
Chemo could answer this better, but you need something strong enough to dissolve it and keep it in solution.QUOTE]
No liquid research chemical I have ever ordered has been dissolved in the solution. I have always had to heat it and or shake it.
Your statement describes my situation to a tee!God, with some of these questions being asked, you have to wonder if you should be homebrewing at all.Scarry.
We all start somewhere, chief.Chemo could answer this better, but you need something strong enough to dissolve it and keep it in solution. God, with some of these questions being asked, you have to wonder if you should be homebrewing at all.Scarry.
I havn't done it myself yet, and some hormones dissolve more easily,but you can either bake it in the oven at 200 to 225, or heat your solution in a pan of hot water. Either way will work.I have a question about M-5AA and M1,4ADD. I ordered a gram of each and I also ordered some PEG-400. When I put these in solution do I need to heet them at all, and if so what is the best method of doing this?
you will need to heat them slowly in a water bath, you want to use 99ml of peg400 for every 1 gm of powder to give a 10mg/ml.
none of them go into water alone, they just get clumpy on the bottom. Peg is the only thing that works for M5AA, you maybe able touse vodka or others for some other powders but not fo rthe m5aa.
- Looking at the "powder instructions" on designersupps.com, you suggest a 75/25 combo of PEG400 and propylene glycol. I take it from this that the PEG400 works adequately all on it's own? That'd save me $5 Alternately, can I use a 50/50 mix of PG/PEG?you will need to heat them slowly in a water bath, you want to use 99ml of peg400 for every 1 gm of powder to give a 10mg/ml.
Correct. PG and PEG are fairly common food additives, as well as drug solvents. Not sure what the effects of an "overdose" are, but at 10mg prohormone per mL of PEG you'd OD on the ph firstI just go my PEG and on the bottle it says Ingestion – Induce vomiting and call medical attention. I take it a ml or 2 a day won’t hurt anything.
Thanks, good info....And then my curiosity got the better of me -
The MSDS for PEG400 states that "Large doses of the lower molecular weight products (PEG 200 and 400) may cause gastro-intestinal upset" and that the oral LD50 for rats (i.e. what is the lethal dose for 50% of rat test subjects) is 30.2g/kg, so assuming 1-to-1 concurrence with humans, it would take 3 kg of PEG 400 to kill a 220 lb guy.
My M1,4ADD dissolved completely in 99ml of Peg-400 and has been holding in solution for 3 days now without any particles floating in it. It's just the M5aa that will not completely dissolve. I guess I'll do what you have suggested and see what happens. Thanks for your help.Give it a 2 minute hot water batrh and shaking prior to each dosage. I had to do that with my M1,4ADD each dosage. It's no big deal bro.
I was wondering if it would be reasonable to try to do a 20 mg/mL solution of M5AA...it sounds like 10 is about the saturation point.The M5AA is supposed to have a lower solubility then other methyls (M1T, M1,4)
If people are having trouble keeping it in solution at 10mg/ml, I think it's pretty safe to say that 20 is too much.I was wondering if it would be reasonable to try to do a 20 mg/mL solution of M5AA...it sounds like 10 is about the saturation point.