Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Painful Prop

i agree, the prop im on now is at 100mg/ml. i took a small amount down to 50mg/ml and it still hurt. i think it is just a prop-erty:rofl: of test prop!
 
I have some test prop that was homebrewed from powder, and another bottle of prop from a syno conversion. Neither of them really hurt that bad, the next day you can tell you got a shot, but it is not like a real pain, just kind of an annoyance. Maybe my body just accepts the prop good, or maybe there is no prop in there at all....just oil:think:
 
There must be some prop that hurts less than others if QV is so bad that you can't sit down for days. I can take pain, but if it is absurdly painful with ed or eod shots, how the **** am I supposed to function? There must be some less painful.
 
I wouldnt do QV prop, if thats absolutely all you can find, maybe, but if you cant drink the water there, why inject yourself with something from Mexico, from what I have heard alot of there stuff is underdosed and some is dirty....lots of infections due to QV.
 
I took BD Prop and it hurt like a bitch, to the point where I could barely walk. Cut it 1:1 with bacteriostatic water, it helped immensly.
 
I have taken QV prop before, 100mg/ml using 1cc at a time. It hurt a bit during injection, but nothing unusual. The pain the day(s) after isn't pleasant but it subsides pretty quick. Good luck doing a delt injection then sleeping on your side though... ****..talk about some pain.
 
I have some homebrewed prop 100mg/ml... next day pain isn't so bad it's day 2 and 3 that sucks.

But your can certainly get some near painless prop... Pharma grade. I've used testopin-100 (not competely painless but you can walk easy enough after a 100mg shot to the thigh. I've also heard alot of good things about testovis (made in Italy), it actually comes 100mg in 2ml of solution. I venture to guess it's about as painless as you can get.

Personally though, from now on I'll only use prop to start up, and close out cycles... I'm going to stick with test enan based cycles.
 
Pain prop isn't during or directly after injection... The subsequent 1-3 days can be a real bitch though. My quads especially hate it. I've had the same issue w/ sust, but once again I attribute it to the prop. For me all other test is smooth as silk, and truly painless.
 
With the right oil/solvent you can defineatly get a painfree prop at 100mg/ml. Most compounded and commercial stuff is prepared poorly IMO (because its painful)
 
MikeBU said:
I took BD Prop and it hurt like a bitch, to the point where I could barely walk. Cut it 1:1 with bacteriostatic water, it helped immensly.
Click to expand...
Interesting. I haven't heard of anyone doing this before. How did you come up with that idea. Would you care to elaborate?
 
I just finished a 12 cycle of Homebrew test prop. At the start
I ran it with Tren and there was very little pain. I only ran the
Tren for 6 weeks and then continued on with the prop. As soon
As I stopped the Tren I got felt like someone hit me with hammer
a day after each injection. It makes it difficult to train legs
but other then that no problems, just grin and bare it.

Little Man
 
Strateg0s said:
Interesting. I haven't heard of anyone doing this before. How did you come up with that idea. Would you care to elaborate?
Click to expand...
i tried something similar. mix 1:1 B.W. with the prop, and than swirl it around and mix it all up well. after that, put the syringe upright and hold for a few minutes. the Bacteriostatic water will rise to the top, and than squirt it out. shoot what you have left. the bacteriostatic water takes the BA out of solution and when you squirt it out, it makes it alot less painful. props to petefox for that tip
 
chasec said:
i tried something similar. mix 1:1 B.W. with the prop, and than swirl it around and mix it all up well. after that, put the syringe upright and hold for a few minutes. the Bacteriostatic water will rise to the top, and than squirt it out. shoot what you have left. the bacteriostatic water takes the BA out of solution and when you squirt it out, it makes it alot less painful. props to petefox for that tip
Click to expand...

Might have to try this...

Little Man is that a Pitt? If so what line?
 
Yes it is a pit. He is Gambler's Virgil on the top and

Indian Bolio on the bottom. In that pic his is year
old and about 55 pounds.
 
Little_Man said:
Yes it is a pit. He is Gambler's Virgil on the top and

Indian Bolio on the bottom. In that pic his is year
old and about 55 pounds.
Click to expand...

Gambler's V used to be my Avater (sp?) here. I have a little girl thats Mayday on the top and Dolly/Polly on the bottom (this mix is of Tant's Yellow with some Gamblers Virgil). And she goes about 62lbs.
 
I have a friend that has a double bred mayday female.


Where did you get you pit from? You can PM me if you
want. I don't want to full up this thread with dog stuff.

Little Man
 
Can't PM you LM. You have to be a board supporter for PM ability. But I got her from Southern Bulldogs in NC/VA
 
Sorry about that. My Friend and I both got our dogs from

Southern bulldogs also. Small world, my dog is an UNO
son. My friends dog is a Maximo daughter, she is on the
Mayday page. Her name is Yellow Bird.

Little Man
 
I've made my own TP homebrew and use D***d kit and no pain whatsoever. I'm using his oil/solvent for all my homebrewing from now on!
 
You must log in or register to reply here.
Back
Top