Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Methyl-Alcohol, OOPS!!!

dkkon1

dkkon1

Banned
Ok, here's a question for you guys: I made a batch of synovex/Test prop. If you're familiar with the process you know that you dissolve the synovex pellets in Methyl alcohol, use an estrogen solubolizer, then add distilled water to make test crystals, then the crystals are rinsed repeatedly in a filter with distilled water to wash away any left-over estradiol, and methyl-alcohol. So I did everything right except that i had some of the crystals in a filter and before i was able to rinse them at all i noticed that the filter was starting to tear. So i scraped most of the crystals onto a new filter and placed the torn one on my baking pan, i finished the process with the new filter, and put the new filter on the old one and put them into the oven to dry.(The first filter with remnant methyl-alcohol, and trace estradiol was baked too, but it gets worse.) Of course I noticed none of this at the time... and once dried I scraped off the new filter and without thinking the first one too. So my question is: Is there enough methyl-alcohol and estradiol to be a problem. This is for an IM injection, I don't want to throw it away as it is over 100ml @ 80mg/ml. Thanks for your help.
 
Actually it's not, in fact most test prop preparations will be around 100mg/ml or even 200mg/ml. I made 80mg/ml specifically for the the particular dosage i'll be injecting. Anyway, I hope someone has an answer, because i don't have a clue.
 
dkkon1 said:
Actually it's not, in fact most test prop preparations will be around 100mg/ml or even 200mg/ml. I made 80mg/ml specifically for the the particular dosage i'll be injecting. Anyway, I hope someone has an answer, because i don't have a clue.
Click to expand...

yeah lol I got some reading materials mixed up, lol
 
Sorry, I don't know (only done a fina conversion), but I'll bump you.

MB
 
I would be more concerned with the reiment methyl alch [heet] than the ediol-- you could always up the dose of AI .Even if your process went smoothly I always thought that some amount of heet would be left over [it supposed to evaporate]but 100? who knows? what are the dangers of injecting trace amounts of heet?But on the otherside --have you seen the prices of TP recently?
 
skull said:
I would be more concerned with the reiment methyl alch [heet] than the ediol-- you could always up the dose of AI .Even if your process went smoothly I always thought that some amount of heet would be left over [it supposed to evaporate]but 100? who knows? what are the dangers of injecting trace amounts of heet?But on the otherside --have you seen the prices of TP recently?
Click to expand...


Very good points, well I should have updated this I guess, For anyone who cares, I couldn't bear to throw out 100ml of test prop so I tried a very small amount to test it ( 1/8 ml) Had no problems, so I gradually increased the dose to what I had planned (1ml/day) No problems at all, No pain, Feels better than the test-e I am shooting. Thanks for the interest guys.
 
dkkon1 said:
Very good points, well I should have updated this I guess, For anyone who cares, I couldn't bear to throw out 100ml of test prop so I tried a very small amount to test it ( 1/8 ml) Had no problems, so I gradually increased the dose to what I had planned (1ml/day) No problems at all, No pain, Feels better than the test-e I am shooting. Thanks for the interest guys.
Click to expand...
just wondering what you used for estrogen solubizer?[kit]? or sodium hydroxide [Lye] ?
 
Used a kit, some people think that NaOH will salt the estradiol and not the ester, but it seems that the NaOH will salt both leaving you with test-no-ester (which is what I'm making right this second) There is a method that is sometimes used in which the NaOH is only left to react with the test/methyl alcohol for a short period of time, in an effort to get rid of the estradiol but leave the prop ester intact, however chances are you'll be left with an unpredictable mix of Test-no-ester, and test-prop, which is obviously undesirable. So in short I stick to estro-solubolizer for prop and NaOH for TNE.
 
You must log in or register to reply here.
Back
Top