Gh from Alibaba.com questions

sloppychauncy

sloppychauncy

New member
Awards
0
Now before you flame me automatically, I have done quite a bit of extensive research on the different sellers and what not vice versa, and have picked up a few kits from a few different carriers; all with good reviews. The worst rating coming in at ~8 iu/10 iu so that’s not TERRIBLE for $~65$ a kit! My only question is that when I’m reconstituting them it only takes about 3 ml bac water and it’s pretty much full and can’t fit anymore? But it still lets me draw out at LEAST 10 iu? Why is this?
 
sloppychauncy

sloppychauncy

New member
Awards
0
Exactly what I posted... and these were all kits bought before all this virus bullshit started
 
sloppychauncy

sloppychauncy

New member
Awards
0
Which part? I don’t see a part which doesn’t make sense. I’m just wondering since they’re supposed to be 10 iu vials why does it fill up with only about ~3 ml bac water and still allow me to withdraw easily over 10 iu hgh per vial?
 
DemntedCowboy

DemntedCowboy

Well-known member
Awards
3
  • Established
  • RockStar
  • First Up Vote
Dude the last place I would order HG is there. But that's just me. Where I get mine from is $200 a kit, and it is legit
 
sloppychauncy

sloppychauncy

New member
Awards
0
I know same here but after reading around tons of different forums and reviews in addition (which I know can be faked but there’s way too much trouble to go through to do that with this) and PLUS the pictures of the laboratories they are made are legitimate as **** so I’m willing to spend around ~60-75$ for around ~100IU (supposedly) cuz **** that’s cheap!
 
DemntedCowboy

DemntedCowboy

Well-known member
Awards
3
  • Established
  • RockStar
  • First Up Vote
Yeah cause pics from the internet of legit labs cant be copy and pasted or faked
 
sloppychauncy

sloppychauncy

New member
Awards
0
No **** they can, how about you stop being a dickhead and just try to help out?
 

trumac

Active member
Awards
2
  • Established
  • First Up Vote
They’re 10 iu vials that has nothing to do with how much bac water you can put into them. I put 1 ml into my 10iu vials so that every .1 ml is an iu. So if I want 3ius I fill it to the .3ml or 30 mark. My guess is you’re putting in 3 ml and just diluting it more than you think you are
 

Mathb33

Well-known member
Awards
4
  • Established
  • First Up Vote
  • RockStar
  • Best Answer
Usually in life you can’t cheat prices. There’s a reason kits are usually 200-300$. Thats what quality cost. Believing you will have same quality and legit stuff for 80$ is very naive of you.
 
sloppychauncy

sloppychauncy

New member
Awards
0
I thought it was every ml of bac water per iu gives you an equal amount so that each 10 iu Mark on the syringe is an iu?(I’m relatively new to gh)
 

trumac

Active member
Awards
2
  • Established
  • First Up Vote
1 ml of bac water will give you 1 iu at the 10 mark
 
sloppychauncy

sloppychauncy

New member
Awards
0
Well it’s giving me a hell of a lot more than just 1 iu? Cuz I’m able to pull back to the 10 mark on the syringe multiple times with around 3 ml
 
NoAddedHmones

NoAddedHmones

Well-known member
Awards
4
  • RockStar
  • Established
  • Best Answer
  • First Up Vote
Each ml has 3.33iu of GH.

Was it really that hard for people to answer, instead of going off on tangents?
 
ax1

ax1

Legend
Awards
3
  • RockStar
  • Legend!
  • Established
I know same here but after reading around tons of different forums and reviews in addition (which I know can be faked but there’s way too much trouble to go through to do that with this) and PLUS the pictures of the laboratories they are made are legitimate as **** so I’m willing to spend around ~60-75$ for around ~100IU (supposedly) cuz **** that’s cheap!
There is a strong chance its either fake or under-dosed. You would need to invest in a 3rd party lab test to verify what you get unless you want to gamble your own body and money. They can provide a CoA but anybody can make those up and is not evidence its a pure batch, or it could be real but from another batch.

Pictures of the lab is not evidence your getting real product. If anything, Id be willing to bet that if you go to their office you may end up in some abandoned apartment building.
 

trumac

Active member
Awards
2
  • Established
  • First Up Vote
Well it’s giving me a hell of a lot more than just 1 iu? Cuz I’m able to pull back to the 10 mark on the syringe multiple times with around 3 ml
Yeah with 1 ml you’d be able to pull it back to that 10 mark 10 times.

Using 1 ml of bac water makes the measurements easier for me. The vial has 10 ius of gh in it no matter how many ml of bac water you use. Different amounts will just give you different concentrations.

1ml will mean that you have a concentration of 10iu/1ml. That means you can pull the plunger back to the 10 mark (.1ml) and get 1 iu of gh. Or to the 35 mark for 3.5iu etc. Does this make sense?
 
Last edited:
sloppychauncy

sloppychauncy

New member
Awards
0
Yeah with 1 ml you’d be able to pull it back to that 10 mark 10 times.

Using 1 ml of bac water makes the measurements easier for me. The vial has 10 ius of gh in it no matter how many ml of bac water you use. Different amounts will just give you different concentrations.

1ml will mean that you have a concentration of 10iu/1ml. That means you can pull the plunger back to the 10 mark (.1ml) and get 1 iu of gh. Or to the 35 mark for 3.5iu etc. Does this make sense?
Ok so since I’m somewhat new to this gh stuff, let me make sure I got this right. If each vial is supposedly 10iu(I understand that’s a big IF, wouldn’t that mean it’d take 10 ml bac water to mix to make 10 iu of hgh?
 

trumac

Active member
Awards
2
  • Established
  • First Up Vote
Ok so since I’m somewhat new to this gh stuff, let me make sure I got this right. If each vial is supposedly 10iu(I understand that’s a big IF, wouldn’t that mean it’d take 10 ml bac water to mix to make 10 iu of hgh?
No. There is 10iu of gh regardless of how much bac water you put into the vial. The amount of bac water is going to affect how much you need to draw for each dose. If you just add 1 ml it makes the dosing super easy to dose but some people use more.
 
sloppychauncy

sloppychauncy

New member
Awards
0
Ok that’s what I meant, I just stated that in a retarded way, but what I’m ultimately getting at is—can anyone tell me since I’m used to putting 1ml bac water per iu gh, to make dosing easier, then why does the 10iu vial fill up with only about 3 ml bac water?
 

trumac

Active member
Awards
2
  • Established
  • First Up Vote
Ok that’s what I meant, I just stated that in a retarded way, but what I’m ultimately getting at is—can anyone tell me since I’m used to putting 1ml bac water per iu gh, to make dosing easier, then why does the 10iu vial fill up with only about 3 ml bac water?
Why would you want to inject several mls a day by doing it that way? You could use 1ml for the whole vial and literally inject 1/10th the volume of water and the same amount of gh
 
sloppychauncy

sloppychauncy

New member
Awards
0
Why would you want to inject several mls a day by doing it that way? You could use 1ml for the whole vial and literally inject 1/10th the volume of water and the same amount of gh
Wait what can you reword that lol ? How else would I be able to measure out dosages like 3-5 IU for example
 

trumac

Active member
Awards
2
  • Established
  • First Up Vote
Put one ml of bac water into your 10iu vial of gh. When you are ready to use it let’s say you want to dose 3iu. Pull out .3ml which is the 30 mark on your syringe. That’s 3iu. You want 5iu? 50 mark. 3.5iu? 35 mark. 4.2iu? 42 mark.
 
sloppychauncy

sloppychauncy

New member
Awards
0
Put one ml of bac water into your 10iu vial of gh. When you are ready to use it let’s say you want to dose 3iu. Pull out .3ml which is the 30 mark on your syringe. That’s 3iu. You want 5iu? 50 mark. 3.5iu? 35 mark. 4.2iu? 42 mark.
Most simple straightforward way put yet to me man, thanks
 
sloppychauncy

sloppychauncy

New member
Awards
0
Put one ml of bac water into your 10iu vial of gh. When you are ready to use it let’s say you want to dose 3iu. Pull out .3ml which is the 30 mark on your syringe. That’s 3iu. You want 5iu? 50 mark. 3.5iu? 35 mark. 4.2iu? 42 mark.
Most simple straightforward way put yet to me man, thanks
 
sloppychauncy

sloppychauncy

New member
Awards
0
Put one ml of bac water into your 10iu vial of gh. When you are ready to use it let’s say you want to dose 3iu. Pull out .3ml which is the 30 mark on your syringe. That’s 3iu. You want 5iu? 50 mark. 3.5iu? 35 mark. 4.2iu? 42 mark.
Most simple straightforward way put yet to me man, thanks
 
heebs10

heebs10

Well-known member
Awards
1
  • Established
Yeah with 1 ml you’d be able to pull it back to that 10 mark 10 times.

Using 1 ml of bac water makes the measurements easier for me. The vial has 10 ius of gh in it no matter how many ml of bac water you use. Different amounts will just give you different concentrations.

1ml will mean that you have a concentration of 10iu/1ml. That means you can pull the plunger back to the 10 mark (.1ml) and get 1 iu of gh. Or to the 35 mark for 3.5iu etc. Does this make sense?
That

If you use a 1ml slin pin, the pin has 100 units (not iu’s) per ml. So if you use 3 ml of bac water, that’s 300 units (it’s made for insulin which is measured in units which is a boule app it works for any liquid)..

..anyways divide 300 units / 10iu = 30 units (0.3ml per iu) .. so 30 little lines (aka the 3 mark on the syringe is 1iu.

I’m a nurse bro, but there’s lots of other good help in here by the looks of it. Just divide volume of bac water by # of iu... long story short
 

Similar threads


Top