2 questions about 'dermals

Rock Lee

Member
1. Are liquid products like DermaBolic's "Carrier Matrix" found to be better/worse/the same as gel/lotion products like BDC's "T-Gel" ?

2. Can you ever have uneven distribution of powders in a 'dermal? Like if one didn't shake it up enough, or if it sat for a while, would it be possible for it to "unbind" and maybe half the bottle would be more potent than the other half?
 
Rock Lee said:
1. Are liquid products like DermaBolic's "Carrier Matrix" found to be better/worse/the same as gel/lotion products like BDC's "T-Gel" ?

2. Can you ever have uneven distribution of powders in a 'dermal? Like if one didn't shake it up enough, or if it sat for a while, would it be possible for it to "unbind" and maybe half the bottle would be more potent than the other half?
Click to expand...
1. BDC's gel will hold a max of 10g of powder per 4oz bottle, dermabolics/avant will hold about 7.5g. BDC is also said to have a slightly better absorption rate. Dermabolics is a quality product, but more expensive & not quite as potent as BDC.

2. If you feel grit in the lotion, that is undissolved PH. It will most likely not be absorbed unless it is dissolved. It should stay in solution without a problem, but make sure you get all dissolved at the start. You will usually have a small amount of grit no matter what you do, impossible to completely avoid it.
 
I've been away from this for a while, but what about good 'ol DMSO? Is the absorption from the T-gel or dermabolics spray better?
 
The new t-gel contains DMFA instead of DMSO. It is a better absorption enhancer & is less irritating to the skin.
 
Longdog said:
1. BDC's gel will hold a max of 10g of powder per 4oz bottle, dermabolics/avant will hold about 7.5g. BDC is also said to have a slightly better absorption rate. Dermabolics is a quality product, but more expensive & not quite as potent as BDC.

2. If you feel grit in the lotion, that is undissolved PH. It will most likely not be absorbed unless it is dissolved. It should stay in solution without a problem, but make sure you get all dissolved at the start. You will usually have a small amount of grit no matter what you do, impossible to completely avoid it.
Click to expand...

1. Avants forums will tell you exactly the opposite. There a few threads of firefights. I think both gels are roughly comparable, and Dermabolics will be the one to go with if anyone wants to avoid DMSO or DMFA.
 
MarcusG said:
1. Avants forums will tell you exactly the opposite. There a few threads of firefights. I think both gels are roughly comparable, and Dermabolics will be the one to go with if anyone wants to avoid DMSO or DMFA.
Click to expand...
I guess we'll never know unless somebody runs an absorption test.

Still, the BDC gels will hold 10g+ of PH powder. I have never heard of anyone getting 10g into avant's gel. Maybe it does now, who knows. Like I said, they are both excellent products.
 
Longdog said:
I guess we'll never know unless somebody runs an absorption test.

Still, the BDC gels will hold 10g+ of PH powder. I have never heard of anyone getting 10g into avant's gel. Maybe it does now, who knows. Like I said, they are both excellent products.
Click to expand...

The first transdermals I ever used were by Dermabolics. I was using 4-Derm and as long as I shook the bottle thorougly I was always able to add 4 extra grams of powder to the 6 grams already in solution. One time I did have to sit the bottle in hot water for it all to go in.
 
Last edited:
Would trenbolone stripped from component TH be acceptable to use in a T-gel or Dermabolic spray? I can't imagine it woulld be any different from the other available powders, but I thought I'd ask. I'm doing my math and it seems much more cost effective to use a tren/4AD 'dermal than a 1-Test/4 AD 'dermal
 
Many have had success with tren in a transdermal. I'm sure there's plenty of info in the AAS section.
 
Don't do what I did. I put the powder in a bottle first, then poured T-gel onto the powder. 6 g 1-T, 2.5g 4-AD, 2.5 g 4-OHT (hoping it would all fit). Well, I put the bottle into hot-ass water, let sit, and shook. I thought everything would be fine. The powder never distributed into the solution and at least half of it stuck to the walls of the bottle and turned into a big clump. I eventually fixed the problem, but lesson be learned; put the powder into the solution, not the solution onto the powder.
 
You must log in or register to reply here.
Back
Top