Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Sediment in unopened bottle of RAD140

Mark David

New member
Sediment/particles in unopened bottle of Rad140.
Was never refrigerated, but is over a year old, but unopened. Tried shaking it up well, put it in warm water, but Sediment remained. Is from a very reputable dealer. Is it safe to use or no good now?
Click to expand...
 
If it's not crystals or something that will go back into solution I would throw it in the garbage. $50 bottle of something is not worth the possibility I get sick. It's honestly probably fine, but I don't see the reason to Risk it to save some chump change
 
Smont said:
Is it clear crystals in the bottom or does it look like black speckles
Click to expand...
Whiteish/clear particles. Tried warming it up and shaking the hell out of it, but won't reconstitute. Was thinking about using right after shaking, for a more even distri union of product, but probably will toss. Thanks for response.
 
The RAD140 I have used in the past was in solution, but I have had products that have come out of solution or arrived that way from reputable site sponsors here.
I did not bother reconstituting it. I treated it like an oral suspension. Shake well, depress the plunger a few times, then take the dose.
 
Mark David said:
Whiteish/clear particles. Tried warming it up and shaking the hell out of it, but won't reconstitute. Was thinking about using right after shaking, for a more even distri union of product, but probably will toss. Thanks for response.
Click to expand...
That just sounds like it started to crash or come out of solution so I'd actually wager it's fine if that's the case
 
Tap water isn't hot enough if it's crashed. With injectable I gotta put a pan on the stove and simmer water, kinda simmer the bottle (vented) or in a oral case, the top has to be off. I'm sure you could find a YouTube video or something on it or something.
 
bigdadybry said:
The RAD140 I have used in the past was in solution, but I have had products that have come out of solution or arrived that way from reputable site sponsors here.
I did not bother reconstituting it. I treated it like an oral suspension. Shake well, depress the plunger a few times, then take the dose.
Click to expand...
Still get the results/effects you expected?
 
Last edited:
Mark David said:
Still get the results/effects you expected?
Click to expand...
Absolutely. One is an AI that consistently arrives that way from a site sponsor here. If it didn't work during my last cycle, I'd have boobies. :)

I do reconstitute injectable oils. Just so I am clear. Orals that come out of solution I treat as a suspension, oil-based injectables I reconstitute.
 
Welp. Put the oral Rad140 bottle 60mls in a glass of warm water, let it sit for awhile then shook it up. Put new warm water in the glass up to the neck of the bottle ( now unopened), and microwaved for 15 sec. Removed bottle, shook it well and repeated for a total of 4 times when it returned to suspension with no sediment. Going to use it.
 
I would say as long as the crystals are not discolored/different colors, you're good. Especially with an unopened bottle from a viable vendor.
Keep in mind you may have also have a higher dose. If the solution ended up being super-saturated (higher than the solvent can hold), you would end up with solids outside of the solution.
OR, it may have arrived this way and you didn't notice, which brings you back to my opinion about treating it as a suspension.
BTW, I like RAD140. I haven't tried it since going to the dark side. Now that I have a few cycles under my old belt, I would feel more comfortable adding it in if those results are what I wanted. I still have a few bottles of it and the raws.
 
You must log in or register to reply here.
Back
Top