Really, and how is that. How do you stop people from breaking in to a home and stealing a gun
Invalid Link Removed
..."This relates to material and construction of the cabinet/receptacle/safe, and to locking mechanisms. Where materials, method of construction or locks do not comply with the Standard, police will require certification of the receptacles's performance as equal to the Standard. Certification is to be by a police recognised professional. Obtain detailed information from your local Police Arms Officer before purchasing or installing your secure storage".
What is classed as safe storage:
Steel safes (Regulation 28(1) (c))
Commercial safes constructed of steel or steel and concrete material and intended to provide storage for firearms must only be approved after consultation and certification by a registered engineer and/or an accredited locksmith/safe smith (who has qualifications and experience relevant to assessing tensile strength of metals and other materials), to ensure they meet the minimum security criteria relating to firearm cabinets/boxes as detailed below.
If a safe is used it must be affixed to the building in the same manner as outlined for steel boxes or steel cabinets,as detailed below.
Steel boxes and cabinets (Regulation 28 (1) (c))
Steel boxes or steel cabinets shall be capable of withstanding reasonable physical attack with hand held tools and weapons, and equivalent to 6 mm mild steel strength. The box or cabinet should be built and finished in a workmanlike manner with negligible gaps between all fixed parts. Where it is proposed to construct cabinets or boxes of a single plate dimension measuring less than 6 mm mild steel or a variety of steel other than mild, consultation must take place with a registered engineer to confirm compliance with the performance based criteria. A certificate of compliance from the registered engineer must be provided in these circumstances.
Two locking mechanisms of no less strength and security performance than a five lever mortise dead lock complying with BS3621:2004 or subsequent amendment shall be fitted to the cabinet door. Owing to reduced size of a steel box designed solely for pistol storage together with the capability for concealment, only one locking mechanism is required. Any door handle fitted shall be designed to break off under leverage.
Drawings (reference C2191) can be obtained from an Arms Office. These give design and fixing recommendations.
A cabinet should be bolted to a minimum of two surfaces, one of which shall be the floor. Bolt shafts shall be a minimum of 10 mm in diameter and when bolted into concrete, expanding or chemical setting bolts may be used. Where the cabinet is bolted to a wooden floor it shall be through bolted to a steel plate which exceeds the floor area of the cabinet and is retained on at least two floor joists. All nuts must be on the inside of the cabinet, and bolts welded or burred to resist removal. It is recommended that the cabinet or box be bolted in a confined space, such as a wardrobe or cupboard.
General security of building
The place in which a safe, box or cabinet is fixed shall be a building, part of a building, or a room which is secured in a reasonable and prudent manner against unauthorised entry. Normally it will be in the licence holder's dwelling. Outbuildings, detached garages, or structures remote from occupied premises will not in general be acceptable. A steel cabinet, steel box or safe should ideally be located within a confined space, such as a cupboard or wardrobe.
Doors
Doors must be of structurally sound condition capable of being firmly locked. Where practicable doors should be hung on the inside with three sturdy hinges. Where doors are required to be externally hinged, two hinge security bolts shall be fitted. Sliding doors shall be fixed so as to resist removal from the outside when locked. External sliding doors shall be secured by double cylindered deadlocks, or from the inside with locking patio bolts. Double leading doors (French doors) shall have a locking patio bolt at the top and bottom of the first leaf (inner door) or flush bolts in edge of the first leaf.
Door framing and the lock striking box shall be securely fixed to the wall so as to resist splitting or forcing open.
A locking mechanism of no less strength and security performance of a five lever mortise deadlock or five pin double cylinder deadlocks or dead bolts shall be fitted to entry doors.
Where a steel cabinet box or safe is located in a room or garage within a dwelling the internal door should be of solid construction with a locking mechanism as described above, secured at all times when the premises are unoccupied.
Windows
All windows should be capable of being firmly closed by hinges, locks, catches or other fastenings maintained in good condition. Louvre windows shall not be used unless grilles and bars that resist cutting or prising by hand held tools are fitted. Window locks or locking window catches should be fitted to all opening windows that are not in the immediate view of occupied premises or public places.
Alarms
The installation of an intruder alarm system is recommended. All intruder alarm systems and subsequent installation procedures shall comply with New Zealand Standard 4301:1983 or subsequent amendment. Such intruder warning devices should be monitored and audible, but other arrangements may be suitable depending on the particular circumstances.