Homebrew Test Prop
- 08-09-2005, 11:59 AM
Homebrew Test Prop
I'm interested in ya'll experiences with homebrew test prop.
My buddies say they trust it more than the real stuff.
I have both options available but the homebrew would be alot cheaper.
I'm just a little sketchy about making this myself.
Also I tried to private message somebody and wasn't allowed. Do you have to donate
to use this?
- 08-09-2005, 12:58 PM
Originally Posted by pimpc1972
Check out the Conversions and Injectables forums.
Yes you have to be a donating member to use PM's.
- 08-09-2005, 01:48 PM
As long as you have a reputable source home brew is THE way to go. If you can make a cake or bake cookies you should be able to whip up a batch of painful prop on your own. NO I have never had "PAINLESS" prop,it's always a nice healthy bit sore the day after,but that's 1/2 the fun,you pin it ,wait for it to start hurting ,then you go squat!
08-09-2005, 02:47 PM
if you guys are worried about prop pain look at this post by DR.D
"I've recently found that buffering your solvent system (oil mix) with trolamine @ 1% totally kills acetate and prop pain I can't believe it took me this long to try it, but it works like magic."
"To my knowledge, they are no longer a sponsor on this board, but lemelange has Triethanolamine (as well as many other chems) readily available and rather economical in manageable sizes. Lemelange was one of the 1st advertisers on this board back in the old days, from it's home-brewing roots when it was BDC"
search under triethanolamine its $7.50 for 16oz that should last a lifetime
here is the origanal post
08-09-2005, 02:58 PM
08-10-2005, 12:06 AM
08-10-2005, 12:12 AM
08-10-2005, 12:28 PM
i made prop at 200/ml using dazed oil and some extra bb. it is only slightly painful and i can do 700/wk w/ eod shots. there is plenty of space in syringe to mix trenace 125/ml and 1-test cyp 200/ml. i used dazed oil and some extra bb and i only experience slight pain. however i quickly get over it when i see explosive muscle gains and the chicks diggin it
08-10-2005, 02:49 PM
I recently converted 50 grams of prop powder, but ran into some trouble. (The melting point was 116-117 degress, with the literature value of 118 degrees, so I know it was "good" Powder was of very fine consistency, pure white). I was making 500mL of 100mg/mL. The majority of the powder dissolved in 15ml of benzyl alcohol and 400 mls of oil. I added another 90 mls of oil (I always slightly "overdose" it) and another five mls of the BA, but a small portion of white powder would not dissolve. Tried heating, shaking, etc. Still no luck. I believe that the undissolved powder is unconverted test base, but have not yet looked into this. A *ahem* "client" used 1/2 mL as soon as it was cooked up (tuesday at ~midnight) and a full mL at noon today. He has reported no soreness, pain, etc. The oil was extra virgin olive oil, autoclaved (His choice, not mine!).
Edit: This makes me feel like such a hack!
08-13-2005, 06:07 PM
I heard of this happening to some other bros with the Prop. One bro had it run through an array and it was solid... so.. should just be a small amount of impurities, moisture or maybe unconverted test base like you said. I'd like to know, but I guess we never will.
I had the same problem with my prop conversion. A small amount wouldn't get into solution.. is just swirled around and settled at the bottom. My first batch I got up to 5% BA and 22%BB and said "**** this" and just filtered it, as I didn't want anymore goddamn BA.
Then I just did it again at 2% 20%.. same results, but I bet this batch is less painful for sure.
I'll be test running it in a few weeks, so I guess I'll see how it feels. I'm going with the 5% batch too. :
08-13-2005, 08:15 PM
09-01-2005, 10:35 PM
Could this be something that could be added to premade gear? Could I put .1ml in my 10ml vial of prop and make it work?Originally Posted by scarfacebling
09-01-2005, 10:51 PM
I wouldn't see why not... I have some.. but the prop portion of my cycle has ended for now... I plan doing just what you suggested on the end portion though.Originally Posted by Boss_K
09-01-2005, 11:01 PM
09-01-2005, 11:03 PM
Why don't ya try it and load up a halfcc or so and give it a whirl bro....I'd be really interested to know....prop kills me but its my favorite steroid.Originally Posted by Poobah
09-02-2005, 07:48 AM
Okay what the hell... this weekend, I'll shoot .5ml without it... and .5ml with... to each delt. That should be a fair test. I'll report back monday at the latest.Originally Posted by Boss_K
09-02-2005, 12:42 PM
09-02-2005, 03:11 PM
I actually just gave this a try earlier this week. It works like a charm. I didn't try shooting it without the trolamine, but I shot 1/2cc with it, and didn't feel a thing. No pain the next day or anything.
My prop was made from synovex. I brewed it at 2% BA, 20% BB, and 0.8% trolamine.
Now I've only tried that 1/2cc. I'm not actually running a cycle right now. I just wanted to make sure that I could use this batch later on.
It is totally pain free. I am very sensitive to this sort of thing too.
09-04-2005, 08:15 AM
Okay.. Test injections have been implemented... It's only been about 10 hours.. No pain in either arm at the moment, usually takes me about 24 hours to start. I'll be back.
09-04-2005, 05:26 PM
About 20 hours post injection.. and I'm just starting to notice very slight soreness to the touch on my right delt ( without triethanolamine)... and I have absolutely no pain or discomfort in my left delt (With Triethanolamine). So early indications are good.. but it's still early. I'm sort of surprised my right delt doesn't hurt more then it does to be honest.... Perhaps I've grown that more accustomed to it all..
(I may test this with 1ml shots... next, then perhaps Bold Prop(killer shiet).)
09-05-2005, 05:55 PM
Just my luck..
I haven't been experiencing any pain at all from either my left or right delt.. so the experiement is a bust... ( I love my shooting my delts for reason).
So time to get serious... 1ml to the biceps... Administered shots 3:30pm earlier this afternoon.. (this is suppose to hurt).
09-05-2005, 06:08 PM
09-05-2005, 06:15 PM
spelling of trolamine
Yeah Poobah. I'm extremely interested in your experiment. I ****in' HATE this prop I'm running right now. It made me skip a few days training and I walk like a retard. I've been grunting so much and complaining, my girl is counting the days until I end. I shot my right Ventro, Right Delt, and Right lat in succession EOD last week, and I couldn't rest on my right side for even a second. It made for some painful sleeps.
Big ups to the trolamine if that **** works. I'll be getting that quick, fast, and in a hurry if it does.
09-05-2005, 06:19 PM
09-05-2005, 06:29 PM
09-05-2005, 06:36 PM
09-05-2005, 07:49 PM
Be sure to rinse, rinse, rinse when making homebrew prop injectable. I didn't rinse enough and I'm now battling gyno
09-05-2005, 08:09 PM
You must be talking about a brewing from cow gear to human gear? ANd you ended up with to much estrogen in the batch? Otherwise I don't understand the connection.Originally Posted by joetrisman
But I should worry I suppose.. I just took 200mg of test prop today... nips are likely going to get sensitive.
09-05-2005, 08:22 PM
Does the trolamine reduce the prop flu as well, or just soreness? The flu is the worst side from prop for myself...injection soreness can just be remedied by popping an advil.
09-05-2005, 11:18 PM
Similar Forum Threads
- By skazzel in forum AnabolicsReplies: 44Last Post: 03-05-2011, 05:59 PM
- By stevecrammer in forum AnabolicsReplies: 5Last Post: 04-20-2009, 12:25 PM
- By pimpc1972 in forum AnabolicsReplies: 0Last Post: 08-09-2005, 01:30 PM
- By Bean in forum AnabolicsReplies: 0Last Post: 02-05-2003, 04:13 AM
- By crazypete in forum AnabolicsReplies: 14Last Post: 02-03-2003, 04:14 PM