great resource - AnabolicMinds.com

great resource

  1. Pityin' fools since '81
    chasec's Avatar
    Join Date
    Dec 2003
    Age
    33
    Posts
    1,220
    Rep Power
    742

    Reputation

    great resource


    this showed up at "another board", thought i'd share the love

    Instructions for Making Injectables from Powders
    By: Harvey Balboner, MOD@ http://www.beyondmass.com
    Test Enanthate 5 gram conversion
    Needed
    5 grams test E
    1ml Benzyl Alcohol = 5% BA
    15.25 ml sesame oil
    Syringes 3cc & 5/10cc
    18 or 20 gauge needles
    mixing Vial
    Sterile Vial
    Whatman sterile filter


    1. Weigh out 5 grams of powder.
    2. Place powder in vial.
    3. Add BA to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.

    Makes 20ml @ 250mg/ml
    Test Enanthate 10 gram conversion
    Needed
    10 grams test E
    2ml Benzyl Alcohol = 5% BA
    30.5 ml sesame oil
    Syringes 3cc & 5/10cc
    18 or 20 gauge needles
    mixing Vial
    Sterile Vial
    Whatman sterile filter


    1. Weigh out 10 grams of powder.
    2. Place powder in vial.
    3. Add BA to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.

    Makes 40ml @ 250mg/ml
    Test Cypionate 5 gram conversion
    Needed
    5 grams test c
    1ml Benzyl Alcohol = 5% BA
    15.25 ml sesame oil
    Syringes 3cc & 5/10cc
    18 or 20 gauge needles
    mixing Vial
    Sterile Vial
    Whatman sterile filter


    1. Weigh out 5 grams of powder.
    2. Place powder in vial.
    3. Add BA to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.


    Makes 20ml @ 250mg/ml
    Test Cypionate 10 gram conversion
    Needed
    10 grams test c
    2ml Benzyl Alcohol = 5% BA
    30.5 ml sesame oil
    Syringes 3cc & 5/10cc
    18 or 20 gauge needles
    mixing Vial
    Sterile Vial
    Whatman sterile filter


    1. Weigh out 10 grams of powder.
    2. Place powder in vial.
    3. Add BA to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.


    Makes 40ml @ 250mg/ml
    Equipoise (EQ) for 5 grams of powder (eq is actually liquid at room temp.)
    Needed
    5 grams EQ
    20.50 ml oil
    .75 ml Benzyl Alcohol = 3% BA
    Syringes 3cc & 5/10cc
    18 or 20 gauge needles
    mixing Vial
    Sterile Vial
    Whatman sterile filter


    1. Weigh out 5 grams of powder.
    2. Place powder in vial.
    3. Add BA to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.

    Makes 25ml @ 200mg/ml
    Equipoise (EQ) for 10 grams of powder (eq is actually liquid at room temp.)
    Needed
    10 grams EQ
    41 ml oil
    1.5 ml Benzyl Alcohol = 3% BA
    Syringes 3cc & 5/10cc
    18 or 20 gauge needles
    mixing Vial
    Sterile Vial
    Whatman sterile filter

    1. Weigh out 10 grams of powder.
    2. Place powder in vial.
    3. Add BA to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.

    Makes 50ml @ 200mg/ml

    1 ml of EQ is 1.18 grams
    Grams * 0.85 = ml of Bold Undec to use.

    EQ is virtually idiot proof, so I would recommend making all of your product in one sitting if you have more than 5 or 10 grams of EQ, instead of trying to weigh out 5 or 10 grams of it.
    Test Prop for 5 grams
    Needed
    5 grams powder
    36.25 ml sesame oil
    2.5ml Benzyl Alcohol = 5%
    7.5ml Benzyl Benzoate =15%
    Syringes 3cc & 5/10cc
    18 or 20 gauge needles
    mixing Vial
    Sterile Vial
    Whatman sterile filter

    1. Weigh out 5 grams of powder.
    2. Place powder in vial.
    3. Add BA & BB to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.

    Makes 50 ml @ 100mg/ml
    Test Prop for 10 grams
    Needed
    10 grams powder
    72.5 ml sesame oil
    5ml Benzyl Alcohol = 5%
    15ml Benzyl Benzoate = 15%
    Syringes 3cc & 5/10cc
    18 or 20 gauge needles
    mixing Vial
    Sterile Vial
    Whatman sterile filter

    1. Weigh out 10 grams of powder.
    2. Place powder in vial.
    3. Add BA & BB to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.

    Makes 100 ml @ 100mg/ml
    Deca for 5 grams
    Needed
    5 grams powder
    18.75ml sesame oil
    1.25ml BA 5%
    1.25ml BB 5%
    Syringes
    Vial
    Sterile Vial
    Whatman sterile filter

    1. Weigh out 5 grams of powder.
    2. Place powder in vial.
    3. Add BA & BB to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.

    Makes 25 ml @ 200 mg/ml
    Deca for 10 grams
    Needed
    10 grams powder
    37.5 ml sesame oil
    2.5ml BA 5%
    2.5ml BB 5%
    Syringes
    Vial
    Sterile Vial
    Whatman sterile filter

    1. Weigh out 10 grams of powder.
    2. Place powder in vial.
    3. Add BA & BB to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.

    Makes 50 ml @ 200 mg/ml
    Tren for 5 grams
    Needed
    5 grams tren powder
    43.75 ml sesame oil
    2.5 ml Benzyl Alcohol = 5%
    Syringes 3cc & 5/10cc
    18 or 20 gauge needles
    mixing Vial
    Sterile Vial
    Whatman sterile filter

    1. Weigh out 5 grams of powder.
    2. Place powder in vial.
    3. Add BA to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.

    Makes 50 ml @ 100mg/ml
    Tren for 10 grams
    Needed
    10 grams tren powder
    84.5 ml sesame oil
    5 ml Benzyl Alcohol = 5%
    Syringes 3cc & 5/10cc
    18 or 20 gauge needles
    mixing Vial
    Sterile Vial
    Whatman sterile filter

    1. Weigh out 10 grams of powder.
    2. Place powder in vial.
    3. Add BA to the vial.
    4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
    5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
    6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
    7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
    8. Place another needle in the sterile vial to relieve the pressure.
    9. Draw out solution with a syringe, run though Whatman filter.
    10. Take other syringe with 2ml oil, run through Whatman into solution.

    Makes 100 ml @ 100mg/ml

  2. New Member
    jeff tesar's Avatar
    Join Date
    Sep 2004
    Age
    43
    Posts
    1
    Rep Power
    123

    Reputation

    were do you buy raw products,of juice
  3. Elite Member
    ManBeast's Avatar
    Stats
    5'7"  XXX lbs.
    Join Date
    Oct 2002
    Age
    32
    Posts
    6,515
    Rep Power
    48650

    Reputation

    If you have to ask, you aren't ready to know. Remember, there is NO source posting, or asking on the board... Period.

    ManBeast
    -Saving random peoples' nuts, one pair at at time... PCT info:
    http://anabolicminds.com/forum/steroids/192992-pct-what-why.html
    -Are you really ready for a cycle? Read this link and be honest:
    http://anabolicminds.com/forum/steroids/191120-checklist-before-thinking.html
    *I am not a medical expert, my opinions are not professional, and I strongly suggest doing research of your own.*
    •   
       

Similar Forum Threads

  1. Replies: 5
    Last Post: 02-15-2008, 11:51 AM
  2. Great Debate: Glutamine worth the money??
    By YellowJacket in forum Supplements
    Replies: 27
    Last Post: 06-25-2004, 07:22 PM
  3. Replies: 26
    Last Post: 03-11-2003, 10:28 AM
  4. great bulking meal for ecto
    By drfly in forum Weight Loss
    Replies: 1
    Last Post: 02-08-2003, 12:00 PM
  5. Great Forum
    By Rhinoman in forum General Chat
    Replies: 6
    Last Post: 11-09-2002, 11:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Log in