First Pinning Cycle Plan

  1. Registered User
    Aznmonk's Avatar
    Stats
    5'11"  155 lbs.
    Join Date
    Nov 2011
    Posts
    164
    Answers
    0

    First Pinning Cycle Plan


    i know these cycle plans are made faster then anyone cares but just want to throw it out there if anyone is interested in giving a few points



    Stats are

    Height: 5ft 7in
    Weight: 168lb
    Age: 22

    Tools Ready

    3x10ml Test-Prop 100mg/ml
    70x20mg nolvadex pills
    45x20mg clomid


    my plan was thinking

    Test Prop EOD 8 Weeks today
    Epistane week 2 - 8 with dosing being 30/30/30/40/40/40

    my questions are what gauges do you prefer?

    i was thinking trying to get inbetween 30-31 with 1ml but online i see good bulk prices for 25-28. also would you think i should just add in low dose of HCG ? cheers

  2. Registered User
    PumpHouse's Avatar
    Stats
    5'8"  205 lbs.
    Join Date
    Dec 2012
    Posts
    1,568
    Answers
    0


    30 is going to be rough.

    23 to inject, 21 to draw is what I use. You might be able to get away with 25.

    Your pretty young to be cycling. And at 168 I'm sure you have a Lot of natty potential left.

    First cycle and doing prop? Why? Do you know your injection sites yet?

    First cycle, I'd drop the epi.

    Get an AI on hand.
  3. Registered User
    Aznmonk's Avatar
    Stats
    5'11"  155 lbs.
    Join Date
    Nov 2011
    Posts
    164
    Answers
    0


    i did a oral cycle roughly 4 years ago in iraq and then another one maybe 2 years ago? in Afghanistan. i enjoy working out regardless of compounds i just been wanting to pin since getting more knowledgeable about the subject. PROP because test E would take at least 3-4 weeks to kick in hard and i want a short stable cycle, ill be pinning in my quad and buttocks, i want the epi for the tail end. i don't see a issue with it
    •   
       

  4. Registered User
    Slappy244's Avatar
    Stats
    5'11"  195 lbs.
    Join Date
    May 2012
    Posts
    639
    Answers
    0


    Try 23g needles, they really aren't that big. When I started my test e cycle I made the mistake of using 25 and it took a long time to push the plunger all the way down. I've never used a 30, and based on how long it took with a 25 I don't think I ever will. Anything smaller than 25 will be annoying.

    I'd drop the epi completely and add 4 weeks to the test. Why not bridge to test e, or run test prop along with test e?
    AM sucks ass. find me on ASF or IMF.
  5. Registered User
    Aznmonk's Avatar
    Stats
    5'11"  155 lbs.
    Join Date
    Nov 2011
    Posts
    164
    Answers
    0


    their is no correlation between needle size and patience, i have patience and am asking for opinions, as far as a bridge goes that could be a idea. i just was aiming for 8-10 week cycle because of moving states in early august. as far as the idea for a bridge if i did 250mg every 3 days wouldn't my levels combined with the prop end up higher then 500mg<?

    EDIT: also what about the HCG i don't see most suggestions leaning towards that for a basic first cycle however if it is a factor of cost vs reward i would prefer the optimal recovery
  6. Registered User
    DetroitHammer's Avatar
    Stats
    6'4"  250 lbs.
    Join Date
    Sep 2008
    Age
    60
    Posts
    1,198
    Answers
    0


    I've been using a 20ga to inject for quite a while now. I draw with an 18ga and inject with a 20ga. For me, I'd never go smaller unless it was a water based solution. Water .23ga/ oil 20ga.
  7. Registered User
    druller655321's Avatar
    Stats
    6'0"  180 lbs.
    Join Date
    Sep 2012
    Posts
    106
    Answers
    0


    Quote Originally Posted by Aznmonk View Post
    their is no correlation between needle size and patience, i have patience and am asking for opinions, as far as a bridge goes that could be a idea. i just was aiming for 8-10 week cycle because of moving states in early august. as far as the idea for a bridge if i did 250mg every 3 days wouldn't my levels combined with the prop end up higher then 500mg<?

    EDIT: also what about the HCG i don't see most suggestions leaning towards that for a basic first cycle however if it is a factor of cost vs reward i would prefer the optimal recovery
    No but there is a correlation between needle gauge, thickness of the oil, and being able to successfully draw up said oil through said needle. I do use 25 g to pin but I cannot draw thicker oils through a 25 g, so as recommended get a large gauge to draw and the absolute smallest IMO would be 25 g to pin. As you were told though it will take longer to pin with a 25 g, but not a big deal.
  8. Registered User
    Aznmonk's Avatar
    Stats
    5'11"  155 lbs.
    Join Date
    Nov 2011
    Posts
    164
    Answers
    0


    ill get a pack of 10 for 23,25, and 20 and see what i feel once i do it. besides the needle. what you think as far as cycle, any additions ? or comments addition to removing epistane?
  9. Registered User
    DetroitHammer's Avatar
    Stats
    6'4"  250 lbs.
    Join Date
    Sep 2008
    Age
    60
    Posts
    1,198
    Answers
    0


    Quote Originally Posted by Aznmonk View Post
    ill get a pack of 10 for 23,25, and 20 and see what i feel once i do it. besides the needle. what you think as far as cycle, any additions ? or comments addition to removing epistane?
    Is the prop water or oil based?
  10. Registered User
    Aznmonk's Avatar
    Stats
    5'11"  155 lbs.
    Join Date
    Nov 2011
    Posts
    164
    Answers
    0


    oiled based, i have access to a plethora of things that are pharmacy grade. father also returns from Asia every 3 months and can get me pharma over there as well
  11. Registered User
    Slappy244's Avatar
    Stats
    5'11"  195 lbs.
    Join Date
    May 2012
    Posts
    639
    Answers
    0


    I'd run prop and a test e (or c), tapering down on the prop over 4 weeks. 8 weeks is too short, try for 12.
    AM sucks ass. find me on ASF or IMF.
  12. Registered User
    Aznmonk's Avatar
    Stats
    5'11"  155 lbs.
    Join Date
    Nov 2011
    Posts
    164
    Answers
    0


    how about 100/80/50/50 & 400 test e per week 1-12?
  13. Registered User
    DetroitHammer's Avatar
    Stats
    6'4"  250 lbs.
    Join Date
    Sep 2008
    Age
    60
    Posts
    1,198
    Answers
    0


    Quote Originally Posted by Aznmonk View Post
    oiled based, i have access to a plethora of things that are pharmacy grade. father also returns from Asia every 3 months and can get me pharma over there as well
    Then you would be fine with a 23ga needle. I would recommend a 20ga, but since you'll be pinning EOD you may find a 23ga more friendly.

    I like the prop. I have always been a fan of short esters, and an entire cycle built on short esters is ideal if you don't mind the pinning.
  14. Registered User
    joeblow1's Avatar
    Join Date
    Nov 2011
    Posts
    289
    Answers
    0


    Use either a 23 or 25 to inject and a 18 to draw. 20 gauge is like a ****ing butcher knife. 25 takes time but its painless and 23 is slightly faster and more painful but not bad. If your gonna use hcg then start at week 6 and run it till 9-10. I always suggest using hcg as it makes recovery easier and it's dirt cheap. Run the clomid in pct at 25-50 mg day max. I wouldn't use that nolva at all. Add in some test boosters and some ostarine.
  •   

      
     

Similar Forum Threads

  1. First pinning cycle...A few questions
    By ripped64 in forum Anabolics
    Replies: 5
    Last Post: 06-12-2009, 12:11 PM
  2. On my first bulking cycle - Planning cutting cycle.
    By AnthonyEhsani in forum Anabolics
    Replies: 0
    Last Post: 11-05-2008, 11:08 PM
  3. First Pinning Cycle help...
    By srx600 in forum Anabolics
    Replies: 1
    Last Post: 07-07-2007, 07:24 AM
  4. First injectible cycle plans. Opinions
    By gators52 in forum Cycle Info
    Replies: 25
    Last Post: 01-28-2007, 06:54 AM
  5. how does my first SD cycle plan looks?
    By munstah in forum Anabolics
    Replies: 17
    Last Post: 03-09-2006, 01:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in