Absorbtion rate of homebrews?

  1. New Member
    Jorta's Avatar
    Join Date
    Nov 2002
    Posts
    41
    Rep Power
    166
    Level
    6
    Lv. Percent
    8.37%

    Absorbtion rate of homebrews?


    Hello,

    I've spent some time going through the recipe posts and some other posts on dosages and cycles. I have also checked out the great excel spreadsheet curt2go provided.

    I've got a quick question on the absorbtion rate of the PH though. I note that on this board the rate with DMSO is set to about 45%. That is using the spray recipe. I have seen another reprint of that recipe on another board and the absorbtion rate was recorded as 25%.

    I only want to confirm the 45% value. I'm trying to figure out how much PH I'll be getting a week with a given number of sprays and clearly there is a big difference between 25% and 45%!

    Right now I have 10g 1-Test in 240ml of the spray with 10% DMSO. I'm assuming about 0.8ml per spray as close as I can measure it. If I'm doing my math correctly (which is not a given), that works out to 8.3mg per spray at 25% and about 15mg per spray at 45%. Added up over a week and that is quite a diifference. 6 sprays a day at 25% is 350mg week and 6@45% is 630mg a week. A bit more than I want to do right now!

    Hence the concern. One value is the target range and the other is way over.

    Can anyone correct me on the absorbtion rate or just point out where I'm going wrong in my calculations?

    Thanks for any input!

    Jorta

  2. Homebrew Help, Inc.
    curt2go's Avatar
    Join Date
    Oct 2002
    Age
    39
    Posts
    1,630
    Rep Power
    963
    Level
    27
    Lv. Percent
    92.72%
    Achievements Posting Pro

    With the recipe that we use ,use the number 40-45% absorption... Talk to ya...
  3. New Member
    Rhinoman's Avatar
    Stats
    5'6"  230 lbs.
    Join Date
    Nov 2002
    Age
    48
    Posts
    158
    Rep Power
    13839
    Level
    14
    Lv. Percent
    91.58%

    Originally posted by Jorta
    Hello,

    I've spent some time going through the recipe posts and some other posts on dosages and cycles. I have also checked out the great excel spreadsheet curt2go provided.

    I've got a quick question on the absorbtion rate of the PH though. I note that on this board the rate with DMSO is set to about 45%. That is using the spray recipe. I have seen another reprint of that recipe on another board and the absorbtion rate was recorded as 25%.

    I only want to confirm the 45% value. I'm trying to figure out how much PH I'll be getting a week with a given number of sprays and clearly there is a big difference between 25% and 45%!

    Right now I have 10g 1-Test in 240ml of the spray with 10% DMSO. I'm assuming about 0.8ml per spray as close as I can measure it. If I'm doing my math correctly (which is not a given), that works out to 8.3mg per spray at 25% and about 15mg per spray at 45%. Added up over a week and that is quite a diifference. 6 sprays a day at 25% is 350mg week and 6@45% is 630mg a week. A bit more than I want to do right now!

    Hence the concern. One value is the target range and the other is way over.

    Can anyone correct me on the absorbtion rate or just point out where I'm going wrong in my calculations?

    Thanks for any input!

    Jorta
     

    45% rate is about right, but this a lot absortion increases with DMSO/ but this strong, I test heavy dosing for two weeks, I am still feeling the effects, Moderate dosing should be enough at least for me 245lbs with only 5'6"
    •   
       

  4. New Member
    Rhinoman's Avatar
    Stats
    5'6"  230 lbs.
    Join Date
    Nov 2002
    Age
    48
    Posts
    158
    Rep Power
    13839
    Level
    14
    Lv. Percent
    91.58%

    Originally posted by curt2go
    With the recipe that we use ,use the number 40-45% absorption... Talk to ya...
    Curt you beat me in the posting, Talk 2 U

     

    LOL
  5. New Member
    Jorta's Avatar
    Join Date
    Nov 2002
    Posts
    41
    Rep Power
    166
    Level
    6
    Lv. Percent
    8.37%

    Thanks folks, I just wanted to make sure I got the data right for my notes!

    Jorta
  6. Brewing Anabolic Minds
    Chemo's Avatar
    Join Date
    Oct 2002
    Posts
    2,022
    Rep Power
    0
    Level
    29
    Lv. Percent
    27.27%
    Achievements Posting Pro

    There are a lot of factors that go into calculating absorption but I personally use 40% to estimate.  It will ultimately depend on such things as amount of DMSO and other PE's, "wet" time, concentration of PH in solution, surface area of application, site of application, temperature, rub-vs-no rub, etc.

    Chemo
  7. New Member
    Jorta's Avatar
    Join Date
    Nov 2002
    Posts
    41
    Rep Power
    166
    Level
    6
    Lv. Percent
    8.37%

    Thanks Chemo,

    I try to maximize all of the variables you noted and I go with about 10% DMSO in solution so I will use the 40-45% rate for calcuations.

    Untimatley, I'm not as concerned about the amount per week (although I don't want to way over or under dose) as I am in keeping consistent notes so that I can easily compare the worth and effectiveness of the PH.

    So 40% it is! Thanks again for the help.

    Jorta
  

  
 

Similar Forum Threads

  1. conversion rate of 1,4 andro
    By BryanM in forum Anabolics
    Replies: 1
    Last Post: 01-30-2005, 09:25 AM
  2. Replies: 0
    Last Post: 07-18-2004, 12:28 AM
  3. Shelf Life of Homebrew Prop
    By duckway in forum Anabolics
    Replies: 4
    Last Post: 06-16-2004, 09:20 AM
  4. Absorbtion Rate
    By nozzi in forum Anabolics
    Replies: 1
    Last Post: 10-29-2003, 01:52 PM
  5. pH level of homebrew
    By Number 5 in forum Anabolics
    Replies: 8
    Last Post: 01-15-2003, 07:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Log in
Log in