Symmetry Training - AnabolicMinds.com
    • Symmetry Training


      by Chris Colucci T-Nation

      "Good bodybuilders have the same mind, when it comes to sculpting, that a sculptor has. You have to analyze. You look in the mirror and say, 'Okay, I need a little bit more deltoids, a little bit more shoulders to get the proportions right.' So what you do is, you exercise and put those deltoids on." – Arnold in Pumping Iron.

      What do Frank Zane, Flex Wheeler, Dexter Jackson, and Phil Heath have in common, other than being four guys you'll probably never get to talk training with over a beer and some wings?

      They stood out from the rest of the big guys on stage because of their constant focus on building symmetry rather than simply adding muscle regardless of proportion. They paid deliberate attention to developing each side of the body relative to the other – front, back, left, right, upper, and lower – as well as only building each individual muscle as it relates to "the total package."

      Whether we're talking about the delts, arms, calves, or any other bodypart, symmetry and proportion are aspects of bodybuilding that often get overlooked by the recreational lifter. It's considered something only the pros have to be concerned with, or "not important right now because I have to get big before I worry about that detail work." That kind of thinking is as inaccurate as it is shortsighted.

      Muscular size without balanced symmetry is like a gym with seven squat racks and only two barbells. The potential for something great is there, but it ends up totally missing the mark because of poor planning.

      Not to mention the strength and health benefits of a balanced physique. Healthy joints, surrounded on all sides by well-developed muscle, will be better protected and more resistant to pulls or strains.

      As far as using that strength, show me a powerlifter who doesn't think a big, strong back is required for a big bench press and I'll show you a guy who needs to increase his bench.

      Let's figure out how we can implement symmetry training into your current plan for even better results.

      Discovering Your Weak Points

      There are a bunch of examples throughout the body where muscular symmetry, or a lack of it, can be either impressive and noteworthy or laughable and embarrassing.

      On a large scale:

      Front and back. Take a "big picture" view and compare the chest, abs/waist, and quads to the back, glutes, hamstrings, and calves. "Training the mirror muscles" is the common motto to remind lifters that what you can't see does still exist, and it can have a huge effect on your overall look and performance. One of the biggest indicators is your posture. If you're a sloucher, it's a safe bet your training needs fixing.

      Left and right. Look at the right arm versus the left, as well as the right and left legs. The majority of people have one limb slightly larger and/or stronger than the other simply by being dominant on that side. It's normal and expected, but for 100% maximal gains, work to minimize any discrepancy in size or performance.

      Upper body and lower body. This should be self-explanatory. Let's all do our part to kill the chicken-legged bodybuilder stereotype by the end of the decade. If you know a guy who gives any excuses for avoiding or minimizing leg work, kick him in the nuts and tell him when his legs are bigger than his arms, he can kick you back.

      On a relatively smaller but still significant scale:

      Calves and arms. The classic bodybuilder's goal is to have the calves measure the same as the upper arms (biceps/triceps) for a balanced look from head to toe. So find the measuring tape, check your arm size, feel a moment of awesomeness, then immediately check your calf size and feel terrible.

      Biceps and triceps. Speaking of arms, it's often pointed out that the triceps take up the majority of space on your upper arm. Then why do you see people in the gym doing "arm routines" that use four different types of curls and only one or two types of extensions? Because most people are, well, dumb. Don't be satisfied with big biceps, make sure you're building big arms.

      Traps and shoulders. The traps are one of those muscles that can warn people from a distance, "Do not aggravate this dude." However, if we consider the entire shoulder, trap, and neck region, bodybuilders with a keen eye will point out that overwhelmingly high traps will encourage the illusion of narrow shoulders, and nobody wants that.

      Deltoid heads. Check out the shoulders around your gym and you're most likely to see overdeveloped front delts, everyone struggling for side delts, and invisible rear delts. In reality, simply reversing the priority – a focus on building rear, side, and front delts, in that order – would practically be a miracle cure for most folks' physiques and their shoulder health.

      Triceps heads, lateral, medial, and long. If your tris look less like a horseshoe and more like a half parenthesis, you've got work to do. There's more to triceps training than just straight bar pressdowns, v-bar pressdowns, and rope pressdowns. If you're skipping overhead work, you're missing a big piece of the puzzle and a big piece of your total arm development.

      Forearms and upper arms. While you might not expect to see many underdeveloped forearms, they're used to some degree in almost every exercise, from rows and pulldowns to deadlifts and heavy bench presses. If you look around, you'll find plenty of guys who could use more meat between the elbow and wrist. And a stronger grip never hurts, either.

      Calves, gastrocnemius and soleus. If you even train calves on a regular basis, congrats, you're in a small club. If you take the time to include straight-leg work and bent-leg work to address both calf heads, you're in an even smaller club, slightly smaller than the number of people who still consider Nicolas Cage a talented actor.

      Now admittedly, those last two examples are a type of fine-tune work that only deserves major attention if you're actually closing in on your physique goal. However, the general idea is worth keeping in mind for the long run so you have that much less catch-up work to do when the time comes.

      Other multi-headed or "multi-muscle muscles" such as the quads, hamstrings, or biceps don't necessarily require the same particular attention because it's much more difficult to significantly target or prioritize those heads with special exercises or techniques.

      Asymmetry Makes an Ass Out of You and Me, But Mostly You

      Once you've taken a cold, hard, truthful self-examination, we need to figure out how to fix whatever needs fixing. Now that you've analyzed your physique and noticed what's disproportionate, the first step is to try to figuring out why.

      Consider the body part and think back to remember how long it's been slacking and then look at how you've been training it recently (the last month, three months, year, whatever). This is why keeping a consistent, detailed training log is so important.

      Your thought process should be along the lines of, "Hey, I've almost got a straight line from my ass to my knee. There are supposed to be hamstrings there. Oh, wait, I haven't deadlifted or done a leg curl since Chappelle's Show had new episodes." Ta-da.

      If it's an issue of left/right asymmetry, which is probably the most common discrepancy around, that calls for a different plan of attack. If you ask most lifters the best way to address that issue, they'll shoot you the obvious answer, "Just add some extra sets for the smaller side."

      This is like telling a 270-pound lady the best way to lose weight is, "Just eat a little less at each meal." Thank you, Sherlock, I truly wish I'd have tried that first. That method might deliver some results in the short term, but it's not the most effective way and it doesn't really solve the problem.

      Arbitrarily doing "a few more sets" for the lagging side just doesn't make sense. How many more sets? Should I keep the same rep range? Do I add the sets at the end of the regular workout or do I add a small-side-only training day later in the week?

      At best, you're going to waste time and energy putzing around instead of addressing the issue efficiently. At worst, you'll flip the discrepancy because you lost track of the goal and end up with a new dominant, overpowering side.

      Sample Solutions

      If your problem is as simple as one underdeveloped muscle (tiny calves, lagging rear delts, etc.), the most direct way to get things back on track is to attack it head-on with a short-term specialization program designed to give the muscle enough time in the spotlight to get where it needs to be.

      John Romaniello wrote a pretty solid guide to specialization workouts here. If you're looking to give a significant boost to one bodypart, you can make a big difference with four to six weeks of targeted work if you go after it with 100%.

      If you've got more than one bodypart that needs to be evened out, prioritize. By definition, you can only have one "worst" bodypart at a time. Figure out what needs the most work or what will have the biggest overall impact on your physique or strength, and address it. Then, once you're one step closer to being balanced, work on the next issue.

      However, remember when I pointed out that left/right asymmetry needs to be corrected differently? Well, the solution is kinda simple and also kinda counter-intuitive. You're going to focus on the lagging side to an extent, while putting the "good" side on maintenance.

      Oh no – gasp and double-gasp – the dreaded "M" word. Surely that means wasted time, several weeks when our strong side does next-to-nothing, practically withering away while we go on and on trying to improve the lazy, lagging side? Hardly.

      This approach makes the most sense because the lagging side needs the extra attention without the stronger side coming to the rescue. If you're like most people, when you lift with both limbs and there's a noticeable difference in strength, the weaker side will (obviously) fatigue first and the stronger side will compensate enough to let you finish a few more reps.

      However, this is the same as doing a barbell bench press, approaching failure, and then lifting your ass a foot off the bench and bouncing the bar off your chest to continue repping out. Yes, technically you're doing more work than if you'd ended the set sooner, but it's much lower quality work that isn't benefiting you in the long run.

      To really give the lagging side a chance to catch up, we need to strategically use unilateral exercises that let one limb, and only one limb, do all the work. We also need to let the problem side dictate the weight and reps used, which it likely hasn't been able to do for quite a while.

      Restoring Balance, Limb By Limb

      If your legs need to be evened out pronto, give these workouts a 6-week trial run, working the rest of your body in two or three sessions the rest of the week.

      Legs Day One:

      Exercise Sets Reps
      A One-leg Extension 3 8-10*
      B Front Squat 4 4-6
      C Stationary Lunge 4 6-8
      D Seated Calf Raise 3 10-15*
      * Hold each peak contraction for a count of "one-one thousand" and, if possible, touch the target muscle with the fingertips of one hand to improve the mind-muscle connection.

      Legs Day Two:

      Exercise Sets Reps
      A Romanian Deadlift 4 6-8
      B Standing Leg Curl 4 8-10*
      C Leg Press (high foot position) 3 8-12
      D Standing One-leg Calf Raise 3 8-12*
      * Hold each peak contraction for a count of "one-one thousand" and, if possible, touch the target muscle with the fingertips of one hand to improve the mind-muscle connection.

      Begin each set of unilateral exercises (the leg extension, lunge, leg curl, and standing calf raise) with the weaker/smaller leg and perform reps until near-failure, then switch to the stronger side and only complete the same number of reps, even though it should seem "too easy."

      If your arms are most noticeably uneven, give this twice-a-week plan a shot for a month or so. The rest of your weekly training shouldn't over stress the upper body too much or else you'll dip into the arms' recovery time. Something like legs/chest-shoulders/back or even a basic upper/lower body split would allow the arms enough rest between direct sessions.

      Arms Day One:

      Exercise Sets Reps
      A One-arm (not alternated) Supinated Dumbbell Curl 3 8-10
      B Straight-bar Cable Curl 3 6-8*
      C One-arm Horizontal Cable Triceps Extension 3 10-12*
      D Seated Overhead Triceps Extension 3 8-10
      * Hold each peak contraction for a count of "one-one thousand" and, if possible, touch the target muscle with the fingertips of one hand to improve the mind-muscle connection.

      Begin each unilateral set (the one-arm curl and the one-arm triceps extension) with the weaker/smaller arm and perform reps to near-failure, then switch to the stronger arm and only complete the same number of reps, even though it should seem "too easy."

      Arms Day Two:

      Exercise Sets Reps
      A1 One-arm Thick Rope Triceps Pressdown 4 10-12
      A2 One-arm Thick Rope Cable Hammer Curl 4 8-10
      Perform one set of each exercise with each side before switching. For example: A1 left, then A2 left, then A1 right, then A2 right, then rest.

      Again, as with the other arm day, begin each set with the weaker/smaller arm and work to near-failure, and then switch arms and match the same number of reps.

      It All Evens Out In The End

      If you haven't learned that balanced bodybuilding is better bodybuilding, you might be a lost cause. Or you might just be forgetting that there's a bit more to building muscle than picking things up, putting them down, and making the scale read higher.

      Whether your current goal is massive size, raw strength and power, or super-crazy-deep abs, maintaining an aesthetic eye in your program design will always pay dividends. You'll still get where you want to go, but you'll end up stronger, healthier, and with an even better-balanced physique to show for it.

      If you've had luck dealing with a strength or size disparity, let me know what worked for you in the LiveSpill below.

      Source: http://www.t-nation.com/readArticle.do?id=5289396
      Comments 5 Comments
      1. MusclestoGo's Avatar
        MusclestoGo -
        Nice article… and well stated.
      1. middleageguy's Avatar
        middleageguy -
        I really liked it.

        I think this go’s very well with article “How To Look Awesome“
        Link ---:> http://anabolicminds.com/forum/conte...k-awesome-734/

        In the article “How To Look Awesome“ there there’s some formulas that can be used on yourself to give yourself a target.
        You can put these in something like excel and then compare to your actual measurements.
        It could help see in numbers what is approaching target and what is lagging.

        I think these two articles go very well together.

        Now I need to see an article that gives diagrams of the body and all the exercises that effect muscle group.

        I took a look at my Triceps and I’m guilty of Triceps that look more like a half parenthesis.
        Got me thinking. So I’ve got work to do.

        Roman's Ratios for Looking Awesome

        Arm size = 252% of wrist size
        Calf size = Equal to arm size
        Neck Size = Equal to arm size
        Waist size = Lean condition w\waist (LCW)
        Shoulder Size = 1.618 x LCW (Golden Ratio)
        Thigh size = 175% of knee size

        Reeves' Ratios:
        Arm size = 252% of wrist size
        Calf size = 192% of ankle size
        Neck Size = 79% of head size
        Chest Size = 148% of pelvis size
        Waist size = 86% of pelvis size
        Thigh size = 175% of knee size
      1. hugry4more's Avatar
        hugry4more -
        Good read
      1. HardCore1's Avatar
        HardCore1 -
        Originally Posted by middleageguy View Post
        I really liked it.

        I think this go’s very well with article “How To Look Awesome“
        Link ---:> http://anabolicminds.com/forum/conte...k-awesome-734/

        In the article “How To Look Awesome“ there there’s some formulas that can be used on yourself to give yourself a target.
        You can put these in something like excel and then compare to your actual measurements.
        It could help see in numbers what is approaching target and what is lagging.

        I think these two articles go very well together.

        Now I need to see an article that gives diagrams of the body and all the exercises that effect muscle group.

        I took a look at my Triceps and I’m guilty of Triceps that look more like a half parenthesis.
        Got me thinking. So I’ve got work to do.

        Roman's Ratios for Looking Awesome

        Arm size = 252% of wrist size
        Calf size = Equal to arm size
        Neck Size = Equal to arm size
        Waist size = Lean condition w\waist (LCW)
        Shoulder Size = 1.618 x LCW (Golden Ratio)
        Thigh size = 175% of knee size

        Reeves' Ratios:
        Arm size = 252% of wrist size
        Calf size = 192% of ankle size
        Neck Size = 79% of head size
        Chest Size = 148% of pelvis size
        Waist size = 86% of pelvis size
        Thigh size = 175% of knee size
        Both articles are very impresiv, and accurate!
      1. middleageguy's Avatar
        middleageguy -
        Found some digrams of the body and execises guide that effect each muscle group.

        Link--:> http://www.bodybuilding.com/exercises/

        As far as my Triceps. It shows all kinds of excercises. But I don't know which ones effect the back half of my Triceps. To get the horseshoe look not the half parenthesis I presently have.
        Link--:> http://www.bodybuilding.com/exercise...muscle/triceps

        Sure this is old news for most on the board.
        Do we have anything like this on anabolicminds.com ?

        Log in
        Log in